FREDDY FAZBEAR TOY MASK - FIVE NIGHTS AT FREDDY'S COSPLAY - ETERNAL

Replica fanart of the Freddy Fazbear toy mask from Five Nights at Freddy's Help Wanted

BIO: Masks are one of the recurring objects found in a couple of Five Nights at Freddy's games. Most of the masks are designed after Fazbear Entertainment's animatronic characters and basically worn by children during their visit at the animatronic band restaurant chains.
The mask made after Freddy Fazbear first debuted in Five Nights at Freddy's 2 and appeared on several games later on, the mask is primarily used as the player's self-defense to fool almost every hostile animatronic.

This model has been designed for 3D printing and comes with TWO VERSIONS:

-Version ONE: full mask complete in one piece
-Version TWO: Mask separated in two pieces for easy printing and a connecting rod to help merge the parts (it needs to be printed X4 times)

The mask has internal holes to attach a plain stretch cord to put it on. These sockets are made on the inner face so to not be visible from the outside if you eant to use the mask as a decorative piece.
All files are pre-positioned for the best results in an FDM printer, and the internal width of the mask is marked on the third photo. you can re-scale it as you see fit.

File format: STL
Level of detail: High

The model of the mask comes scaled aproximately in real size for cosplay, an can be printed on an Ender 3 Pro or similar, or any resin printer. Of course, you can re-scale the parts for your printer to the size you like.

DISCLAIMER: My prints were tested in Simplify3d, Chitubox and Cura with 0.20 mm layer height with 3 perimeter walls and 15% infill to have some room for sanding & avoid fragile surfaces.
I offer no support for the actual printing process.
Having to adjust angles of the model & sanding the print itself is a normal part of the process while making a statue like this.