Zigzag Rows Pen Holder Stl File, For 48 Pens, Fast Print

Your beautiful pens and sharpies need this awesome organizer. Arrange your markers in this unique holder and decorate your desk with this stunning item.

GiftsFromEngineer designed and printed many pencil/pen holder configurations with tubes, square cells and honeycomb style. Continuous zigzag lines make 3D printing much easier and faster, there is no need to make closed cells for each pencil, your printer will be happier with this item. Our zigzag row line design minimizes stringing by this design trick eliminating extra routes that nozzle has to follow.

This item can hold 48 sharpies in three zigzag rows at the perimeter of holder. Center section of the holder can be used for either extra sharpies or other pens, pencils, erasers or paper clips etc.

Rows at this zigzag holder are appropriate for pens and markers having diameters between 9.5– 12.0 mm (0.37- 0.47 inches). No problem, larger items such as highlighters or smaller items such as colored pencils can be organized at the central section.

For instance, these sharpie markers are tested and they are appropriate to easily insert in zigzag rows:
Ultra Fine Point Permanent Marker, Fine Point Permanent Marker, S-Note Creative Marker, Twin Tip Permanent Marker.

Download your stl file and print this holder in your favorite colors. PLA+ or PLA Pro filaments are recommended for flexibility and toughness.

After printing an organizer for yourself, also please give one as a gift to your best friend and don’t forget to share photos from your makes in reviews.

Visit our store at https://cults3d.com/@GiftsFromEngineer to see more ‘Zigzag Rows Pen/Pencil Holders’ designed in different sizes for your sharpies and colored pencils.

‘Zigzag Rows Pen&Sharpie Holder’ design belongs to GiftsFromEngineer. Stl file in this listing is for personal and noncommercial use with a private license to buyers of our store. All design rights are reserved by GiftsFromEngineer.

If you have any questions about custom sizes, commercial printing requests or any special project needs, please get in contact with GiftsFromEngineer Store.

Item Size:
Width/Depth: 125 mm ( 4.9 inches)
Height: 70 mm (2.75 inches)

Layer Height: 0.25 mm (or 0.2 mm better/longer time)
Top/Bottom Thickness: 0.75 mm
Wall Line Width: 0.4-0.6 mm
Wall Thickness: 1.2 mm
Infill: 100% (infill not required)
Brim, Raft, Support: No
Weight: ~140 grams (4.94 oz)
Print in standing position
Mesh checked