Super Mario Cube for SD and micro SD card storage

Cube folding Super Mario interrogation to store SD cards, each side of the folded cube measures 5x5 cm, each side can store an SD card or two micro SD with the adapter included, the cube is printed all at once do not have to mount it, to take it off the bed just have to do a little force to rotate the parts, but the ornaments must be printed separately to make them of another color and then fit them, you can help you glue if you find it hard to fit them to my I have entered well all except one question, but I think it was because a corner came off a little, the idea is to print the yellow cube and the white buttons but I didn't have yellow filament and I couldn't wait to print it, the button to open and close the cube goes in another file in case you prefer to print it in another color, I recommend that you print it vertically as shown in the photo, turn it 90 degrees, so it doesn't break when you force it, soon I will upload an improved version because the cards fit well but it costs a little to remove them, I'm already working on it so I put this version a little cheaper, if you buy it before I publish the new version I will send it free, if you print it in yellow I would like to see the result do not hesitate to upload it!! I will send you a gift if you do it!

Printed on artillery x2, with 0.4mm nozzle, used layer height 0.12, printing time 8.4h for the base with 4 adapters and 50 minutes for the decorations of the 5 sides Dimensions 50mm x 50mm closed and unfolded 180x 128mm, supports activated only from the printing bed, I recommend you to print the button in vertical, turn it 90 degrees in the laminator and the decorations turn the model 180 degrees so that the dots are touching the bed and the interrogation is printed inverted so that they are easier to fit.