Genshin Impact - Furina Accessories

This model is designed for Furina cosplay from Genshin Impact.

It comes in two main parts that are located on her bow ties.

Each main part is designed in separate parts to make sure all the parts come with a flat face that can easily lay on the print bed and attach tools such as clips or safety pins.

Parts A and B are the accessories on the bow tie located on the front right of her waist.

Parts C, D, E, and F are the accessories on the bow tie located on the back of her waist.

There is a picture with parts labeled to their file names in the preview section which you can refer to.

I make two versions for Part A. The alternative version is the version without the embedded gem. You can print this model if you have your gem, or if you wish to print the gem separately.

To chain part B to A, you can either use the sandwich method by printing two copies of part B and sandwiching a string in between and attach to the back of part A.

Parts C, D, E, and F are stacked on top of each other. I make some cut out on the parts as a guide for you to stack the corresponding parts onto each other. You can refer to the picture in the preview section to have a better view.

For scaling, please use the same scale on all the parts. It is designed based on a model with a height of around 155cm. You can use this as a guide for your scaling.

Cheers and Happy Printing!

Furina related:
Genshin Impact - Furina Clothing Accessories
https://cults3d.com/en/3d-model/fashion/genshin-impact-furina-clothing-accessories

Genshin Impact - Furina Top Hat Accessories
https://cults3d.com/en/3d-model/fashion/genshin-impact-furina-top-hat-accessories

Genshin Impact - Furina Tux Accessories
https://cults3d.com/en/3d-model/fashion/genshin-impact-furina-accessories

Genshin Impact - Furina Vision
https://cults3d.com/en/3d-model/fashion/genshin-impact-furina-vision

Genshin Impact - Splendor of Tranquil Waters
https://cults3d.com/en/creations/genshin-impact-splendor-of-still-waters