Skip to content

RRS-18 — 3d Printed RC Car with 2-speed gearbox

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 6.5k views
  • 40 likes
  • 6 downloads
  • 3 collections
License
3D design format
ZIP Folder details Close
  • RRS-18 - 3d printed RC car.zip
    • Drive shafts/shaft-38mm-P1-v2.STL
    • Drive shafts/shaft-45.2mm-P1-v3.STL
    • Frame/Arm front steering VARIATIONS (TOE angle)/steering-arm-front-v5+0.2mm.STL
    • Frame/Arm front steering VARIATIONS (TOE angle)/steering-arm-front-v5+0.4mm.STL
    • Frame/Arm front steering VARIATIONS (TOE angle)/steering-arm-front-v5-0.2mm.STL
    • Frame/Arm front steering VARIATIONS (TOE angle)/steering-arm-front-v5-0.4mm.STL
    • Frame/Arm front steering VARIATIONS (TOE angle)/steering-arm-front-v5-Default.STL
    • Frame/frame-v108-P1.STL
    • Frame/frame-v108-P2-1.STL
    • Frame/frame-v108-P3.STL
    • Frame/frame-v108-P4.STL
    • Frame/steering-arm-P1-v10.STL
    • Frame/steering-arm-P2-v10.STL
    • Frame/steering-arm-P3-v6.STL
    • Frame/steering-servo-v3.STL
    • Gearbox/Gearbox-z26-27-32-v5/clutch-P1-24deg-v8.STL
    • Gearbox/Gearbox-z26-27-32-v5/clutch-p2-v5.STL
    • Gearbox/Gearbox-z26-27-32-v5/clutch-p3-v10.STL
    • Gearbox/Gearbox-z26-27-32-v5/gearbox-2-speed-3-v98.STL
    • Gearbox/Gearbox-z26-27-32-v5/Gearbox-P2.STL
    • Gearbox/Gearbox-z26-27-32-v5/Gearbox-P3.STL
    • Gearbox/Gearbox-z26-27-32-v5/Gearbox-P4.STL
    • Gearbox/Gearbox-z26-27-32-v5/gear-selector-v10.STL
    • Gearbox/Gearbox-z26-27-32-v5/motor-spur-z9-l11.5mm-v3.STL
    • Gearbox/Gearbox-z26-27-32-v5/shaft-spacer-4.25mm.STL
    • Gearbox/Gearbox-z26-27-32-v5/shaft-spacer-6.1mm.STL
    • Gearbox/Gearbox-z26-27-32-v5/z26-l2.5-v3.STL
    • Gearbox/Gearbox-z26-27-32-v5/z27+z13-v6.STL
    • Gearbox/Gearbox-z26-27-32-v5/z27-l35-gear-2-v8.STL
    • Gearbox/Gearbox-z26-27-32-v5/z32-l3-diff-k989-v5.STL
    • Gearbox/Gearbox-z26-27-32-v5/z9-l35-shaft-v4.STL
    • Gearbox/Gearbox-z26-27-32-v5/z9-l5-gear-1-v4.STL
    • Motor 370 Scale 1-18/engine-B-v9-m.stl
    • Motor 370 Scale 1-18/engine-F-v6-m.stl
    • Suspension/Front/Front-Module-v5/Arm upper VARIATIONS (amber angle)/arm-upper-v6+0.2mm.STL
    • Suspension/Front/Front-Module-v5/Arm upper VARIATIONS (amber angle)/arm-upper-v6+0.4mm.STL
    • Suspension/Front/Front-Module-v5/Arm upper VARIATIONS (amber angle)/arm-upper-v6-0.2mm.STL
    • Suspension/Front/Front-Module-v5/Arm upper VARIATIONS (amber angle)/arm-upper-v6-0.3mm.STL
    • Suspension/Front/Front-Module-v5/Arm upper VARIATIONS (amber angle)/arm-upper-v6-0.4mm.STL
    • Suspension/Front/Front-Module-v5/Arm upper VARIATIONS (amber angle)/arm-upper-v6-Default.STL
    • Suspension/Front/Front-Module-v5/Front-Module-v5 - arm-lower-v5.STL
    • Suspension/Front/Front-Module-v5/Front-Module-v5 - brakedisk-front-R-v3.STL
    • Suspension/Front/Front-Module-v5/Front-Module-v5 - brakedisk-front-v3.STL
    • Suspension/Front/Front-Module-v5/Front-Module-v5 - cup-diff-v8.STL
    • Suspension/Front/Front-Module-v5/Front-Module-v5 - dif-box-front-v29-P2.STL
    • Suspension/Front/Front-Module-v5/Front-Module-v5 - diff-box-front-v29.STL
    • Suspension/Front/Front-Module-v5/Front-Module-v5 - Shock-absorber-v4 shock-p2-v3.STL
    • Suspension/Front/Front-Module-v5/Front-Module-v5 - steering hub-v12.STL
    • Suspension/Front/Front-Module-v5/Front-Module-v5 - steering hub-v12-mirror.STL
    • Suspension/Front/Front-Module-v5/NOT REQUIRED TO PRINT (SLA printer is required for printing)/Front-Module-v5 - diff-K989-26-z28-solid.STL
    • Suspension/Front/Front-Module-v5/NOT REQUIRED TO PRINT (SLA printer is required for printing)/Front-Module-v5 - Gears-Diff-1 z8-l3-m0.5.STL
    • Suspension/Rear/Rear-Module-v2/Arm steering VARIATIONS (TOE angle)/steering-arm-rear-v5+0.2mm.STL
    • Suspension/Rear/Rear-Module-v2/Arm steering VARIATIONS (TOE angle)/steering-arm-rear-v5+0.4mm.STL
    • Suspension/Rear/Rear-Module-v2/Arm steering VARIATIONS (TOE angle)/steering-arm-rear-v5-0.2mm.STL
    • Suspension/Rear/Rear-Module-v2/Arm steering VARIATIONS (TOE angle)/steering-arm-rear-v5-0.4mm.STL
    • Suspension/Rear/Rear-Module-v2/Arm steering VARIATIONS (TOE angle)/steering-arm-rear-v5-Default.STL
    • Suspension/Rear/Rear-Module-v2/Arm upper VARIATIONS (amber angle)/arm-upper-v6+0.2mm.STL
    • Suspension/Rear/Rear-Module-v2/Arm upper VARIATIONS (amber angle)/arm-upper-v6+0.4mm.STL
    • Suspension/Rear/Rear-Module-v2/Arm upper VARIATIONS (amber angle)/arm-upper-v6-0.2mm.STL
    • Suspension/Rear/Rear-Module-v2/Arm upper VARIATIONS (amber angle)/arm-upper-v6-0.3mm.STL
    • Suspension/Rear/Rear-Module-v2/Arm upper VARIATIONS (amber angle)/arm-upper-v6-0.4mm.STL
    • Suspension/Rear/Rear-Module-v2/Arm upper VARIATIONS (amber angle)/arm-upper-v6-Default.STL
    • Suspension/Rear/Rear-Module-v2/NOT REQUIRED TO PRINT (SLA printer is required for printing)/Front-Module-v5 - diff-K989-26-z28-solid.STL
    • Suspension/Rear/Rear-Module-v2/NOT REQUIRED TO PRINT (SLA printer is required for printing)/Front-Module-v5 - Gears-Diff-1 z8-l3-m0.5.STL
    • Suspension/Rear/Rear-Module-v2/Rear-Module-v2 - arm-lower-v5.STL
    • Suspension/Rear/Rear-Module-v2/Rear-Module-v2 - brakedisk-rear-v4.STL
    • Suspension/Rear/Rear-Module-v2/Rear-Module-v2 - brakedisk-rear-v4-mirror.STL
    • Suspension/Rear/Rear-Module-v2/Rear-Module-v2 - cup-diff-v8.STL
    • Suspension/Rear/Rear-Module-v2/Rear-Module-v2 - diff-box-rear-P2-v17.STL
    • Suspension/Rear/Rear-Module-v2/Rear-Module-v2 - diff-box-rear-v17.STL
    • Suspension/Rear/Rear-Module-v2/Rear-Module-v2 - Shock-absorber-v4 shock-p2-v3.STL
    • Suspension/Rear/Rear-Module-v2/Rear-Module-v2 - steering hub-v12.STL
    • Suspension/Rear/Rear-Module-v2/Rear-Module-v2 - steering hub-v12-mirror.STL
    • Suspension/Shock Spacers/shock-spacer-v3+1.5mm.STL
    • Suspension/Shock Spacers/shock-spacer-v3+1mm.STL
    • Suspension/Shock Spacers/shock-spacer-v3+2mm.STL
    • Transmission shafts/Axle-v4/axle-v4 - axle-shaft-21.5mm-v5.STL
    • Transmission shafts/Axle-v4/Not required to print - print if you don't want to buy the Part - WLtoys A202-30/axle-v4 - axle-shaft-P2-P2-v5.STL
    • Transmission shafts/Axle-v4/Not required to print - print if you don't want to buy the Part - WLtoys A202-30/axle-v4 - axle-shaft-P3-P1.STL
    • Transmission shafts/Axle-v4/Not required to print - print if you don't want to buy the Part - WLtoys A202-30/DO NOT PRINT(for informational purposes) axle-v4 - shaft-9mm-d1.4.STL
    • Wheels and Tyres/Defender 5093 style for Off road tyre/Defender-wheel-for-48mm-tyre-v4.stl
    • Wheels and Tyres/SVR wheel for Range Rover Sport RC car/Wheel-SVR-RC-car-m.stl
    • Wheels and Tyres/SVR wheel R23 + Michelin Pilot Sport 5/Tyre-R23-Michelin-pilot-sport-5-v28.stl
    • Wheels and Tyres/SVR wheel R23 + Michelin Pilot Sport 5/Wheel-SVR-R23-v10-for-3d-printed-tyre-v2-m.stl
    • RRS-18 - Non-Printed Parts List.txt

Learn more about the formats
Publication date 2023-08-09 at 09:32
Design number 1375246
autocheck

autocheck

3D printer file info

3D model description

RRS-18 — 3D Printed RC Car 1:18 scale with 2-speed gearbox, front, rear and center differentials.

CHASSIS FEATURES:
◽ Real scale - 1/18
◽ 2 Speed Gearbox
◽ 4 Wheel Drive
◽ Smooth running drivetrain, Precise throttle control, tight turning radius
◽ Center, Front and Rear differentials with locking capability
◽ Independent front and rear suspension (IFS, IRS)
◽ Correct Ackermann angle, adjustable Camber and Toe-in
◽ Scale realism. Realistic (Scale) design, the layout of the chassis corresponds to the layout of the real car.
◽ Large suspension articulation
◽ High ground clearance
◽ Extensive customization options

Big Fun - Small Size

🛠️⚙️ ASSEMBLY INSTRUCTIONS
◾ Gearbox
◾ Suspension
◾ Frame

◾ ▶️ 3D Assembly Instructions

▶️ Video - RRS-18 - 3D Printed RC Car - Overview

You can build a crawler course track or realistic scale offroad park at home - link and get the same experience and feeling as driving a big 1/10 RC car.

With this chassis you can build a realistic radio-controlled car in 1:18 scale, which will match the modern Land Rover (Range Rover).

The chassis has smooth running drivetrain that allow you to clearly and easily control the car. The presence of a 2-speed gearbox allows you to use the chassis in different scenarios. For example, when you need smooth and controlled movement down to the millimeter and high torque (Crawler) and when you need a dynamic ride (rally like). These are the same properties that combines a real car Land Rover (Range Rover)

▶️ Video - Demo of Smooth running drivetrain and Precise throttle control

Using a 370 class motor with 15000 rpm with 45 mm wheels, 1st gear has a maximum speed of 2 km/h, 2nd gear has a maximum speed of 18.4 km/h. This allows for a dynamic ride (for 1/18 scale) in 2nd gear and a very smooth and controlled ride in 1st gear, which is essential for RC crawlers.

▶️ Video - Speed TEST. First Gear VS Second Gear

1st gear - gear ratio - 77
2nd gear - gear ratio - 8.55

All-wheel drive system of RRS-18 3d printed chassis has center differential between the front and rear axles to compensate for the different wheel speeds between the axles from different cornering radius. This prevents torsional stresses in the drive train and automatically distributes the driving forces, increasing directional stability and making your driving more effective and controllable. Center differential provides the ability to rotate the wheels of the front and rear axles at different speeds while maintaining an inextricable flow of torque.

When cornering, the right and left, as well as the front and rear wheels of the car travel a different distance and, accordingly, make a different number of revolutions and have different rotation speeds. This leads to wheel slippage, loss of grip and, accordingly, to a decrease in controllability and premature wear, and the stresses in the transmission also increase significantly, which can lead to its failure. The use of differentials allows you to solve this problem and smoothly distribute torque to all drive wheels.

NON-PRINTED PARTS LIST

SCREWS

M1.5x12PB (WLtoys A202-12) - 4pcs - link
M1.5x15PB (Wltoys A202-11) - 4pcs - link
M1.7X10mm PWA - 4pcs - link
M2x5mm - 4pcs - link
M2x5mm KB - 25pcs - link
M2x8mm - 12pcs - link
M2X8mm PWB - 2pcs - link
M3x3mm inner hexagon screw - 6pcs - link
M3x5mm - 2pcs - link

PARTS

Ball Head (WLtoys A949-46) - 8pcs - link
Differentials with Bearings (WLtoys K989-26) - 3pcs - link
Drive Gears (WLtoys K989-30) - link
Shock Absorber (WLtoys A202-29) - 4pcs - link
Driving Shaft (WLtoys A202-30) - 4pcs - link (You can print or buy it. If you want to print the necessary files are in the folder- "Not required to print - if you want you can buy Part - WLtoys A202-30")

WHEELS variants:
1. 3d printed Wheels - 3d model in package (Defender 5093 style)
Tyres 48mm Off-road - link

  1. 3d printed Wheels (SVR wheel for RRS RC car) - 3d model in package
    Tyres from Range Rover Sport 1:18 scale RC car - https://youtu.be/T6P2cLSHgak

  2. 3d printed Wheels (SVR wheel R23) - 3d model in package
    3d printed Tyres (Michelin Pilot Sport 5) - 3d model in package

BEARINGS

BEARING 3x7x2 K989-08 - 4pcs - link
BEARING 3x7x3 - 4pcs - link
BEARING 4x8x2 - 8pcs - link
BEARING 6x10x3 (Bought with diff) - 2pcs - link

NAILS

Nails diameter 1.2mm - 10pc
Nails diameter 2mm - 10pc
Nails 3x80mm - 5pcs

ELECTRONICS

Radiolink RC6GS Transmitter - link
Radiolink R4FGM 4 Channel Mini Receiver with Gyro - link
WPL 16A Brushed ESC Speed Controller - link
JST 2.5mm connectors - link
Battery Li-Po 7.4 400mAh - link
Motor 370 class - link
Servo MG90S with skrews - 2pcs link

USEFUL TOOLS

Stainless Steel Digital Vernier Caliper - link
Side Cutting Nippers - link
Mini Electric Drill Power Tools - link
1.1mm-2.0mm PCB Drilling Bit Set - link
Toothpicks

YOU MAY ALSO LIKE

ezgif.com-optimize.gif Land Rover Discovery - 3D PRINTED RC CAR KIT
autocheck autocheck
Land Rover Discovery - 3D PRINTED RC CAR KIT
  • 9k views
  • 61 likes
  • 10 downloads
  • 2 collections
  • 2 comments
  • 1 make

HERE ARE SOME RECOMMEND ITEMS ▶️

3D printing settings

0.2mm nozzle

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.