Azog Bust from The Lord of the Rings

🔥 Bring the epic to your themed rooms with the Hobbit Azog Bust! 🔥

Lovers of the fantasy world, get ready to bring the magic of Middle-earth into your homes! As a 3D designer, I have passionately and meticulously created the incredible Bust of Azog, the formidable leader of the orcs in The Hobbit. This model is perfect for adorning and enhancing any themed space, from entertainment rooms to reading nooks, a true gem for J.R.R. Tolkien fans!

🌟 Model Features:

Exquisite Details: Every roughness, every expression, every feature of Azog is captured to perfection for an authentic and stunning look!

Perfect Scale: The bust size is ideal for showing off on shelves, desks or any surface of your choice.

Ease of Printing: The model has been precision engineered to ensure trouble-free 3D printing and easy assembly.

Customization: Unleash your creativity! You can choose from different materials and finishes to bring your own unique vision of Azog to life.

Here are the 3D printing parameters for the Hobbit's Azog Bust, taking into account that it can be printed in both SLA (stereolithography) and FDM (fused deposition modeling) technology:

Parameters for SLA Printing:

Resin: Use standard or high quality resin for fine details and smooth surface.

Layers: Set a layer height between 0.05mm and 0.1mm to achieve fine details.

Print Speed: Select a moderate print speed to ensure quality, typically between 20mm/s and 50mm/s.

Supports: Enable automatic or manual supports depending on the model orientation. Make sure they are easy to remove and do not damage details.

Exposure and Cure Time: Follow your printer and resin manufacturer's recommendations for setting exposure and cure time. Generally, between 6-10 seconds per layer.

Resolution: Use a high resolution to capture all the details of the model.

Parameters for FDM Printing:

Material: Use PLA, ABS or other standard filaments. You can opt for special finished filaments if you want a unique look.

Layers: Set a layer height between 0.1mm and 0.2mm for a good balance between quality and speed.

Filler Density: Use 10% to 20% filler for the right combination of strength and economy.

Print Speed: Adjust the speed between 40mm/s and 60mm/s for a balance between speed and quality.

Extrusion Temperature: Sets the extrusion temperature according to the filament manufacturer's recommendations.

Supports: Use supports if necessary, but make sure they are easy to remove and will not damage the model.

Adhesion to Base: Use kapton tape, hot bed or spray adhesive to improve the adhesion of the model to the platform.

Remember that these parameters are general suggestions. It is important to test print with your own settings and adjust the values as needed to achieve the best results. Enjoy printing and enjoy the amazing Hobbit Bust of Azog!

Video: https://youtu.be/INNM5Pid1AM