Skip to content

Pocket Fletching / Vane Jig Larger

Angle.jpg Pocket Fletching / Vane Jig Larger
Side.jpg Pocket Fletching / Vane Jig Larger
Jig_Top_108_2-4_Print_2.png Pocket Fletching / Vane Jig Larger
Fletching_Jig_Top_9.5mm_Hole.stl Pocket Fletching / Vane Jig Larger
Fletching_rear_+1_mm.stl Pocket Fletching / Vane Jig Larger
Fletching_jig_bottom_108mm.stl Pocket Fletching / Vane Jig Larger
Jig_1_b_108mm_x_2.5_in_Print_3.stl Pocket Fletching / Vane Jig Larger
Jig_Top_108_2-4_Print_2.stl Pocket Fletching / Vane Jig Larger
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 733 views
  • 7 downloads
License
3D design format
Folder details Close
  • Fletching_Jig_Top_9.5mm_Hole.stl
  • Fletching_jig_bottom_108mm.stl
  • Fletching_rear_+1_mm.stl
  • Jig_1_b_108mm_x_2.5_in_Print_3.stl
  • Jig_Top_108_2-4_Print_2.stl

Learn more about the formats
Publication date 2023-08-12 at 04:08
?
Published to Thingiverse on: 2020-10-13 at 23:04
Design number 1380560
Toronado3800

Toronado3800

3D printer file info

3D model description

This is a remix of Kriley97's model stretched out to accommodate my 2.5" plastic fletchings / vanes. I also thinned out the top supports and oh so slightly enlarged the front hole and front and back pieces. On my Ender3 Pro the fit was still tight but good tight.

The supports are press fit into the slots on the front and back pieces. The Upper Supports will only fit into each side one way. Once printed, I recommend test fitting each part, then applying a little glue (I use loctite gel control super glue) to adhere the lower support and upper supports to the front and back pieces. You will need to print:

(1) Front
(1) Back
(1) Lower Support
(2) Upper Supports
(3) Arms

How to use:
Place your preferred 2.5" fletching in each of the 3 arms
Apply your preferred adhesive to the fletching, being careful to not get any on the jig components
Slide arrow into jig from the front, aligning the notch with the guide at the back
Slide the arms with fletching into the guides (arms will only fit one way).
Firmly press each arm in place, then wrap with rubber band to hold fletching in position until adhesive is cured based on adhesive manufacturer's recommendation.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.