Skip to content

Capybara Phone Holder / Keyring

Capybara24_0.gif Capybara Phone Holder / Keyring
Capybara24_1.webp Capybara Phone Holder / Keyring
Capybara24_2.webp Capybara Phone Holder / Keyring
Capybara24_3.webp Capybara Phone Holder / Keyring
Capybara24_4.webp Capybara Phone Holder / Keyring
Capybara24_5.webp Capybara Phone Holder / Keyring
Capybara24_6.webp Capybara Phone Holder / Keyring
Capybara24_9.webp Capybara Phone Holder / Keyring
Capybara24_10.webp Capybara Phone Holder / Keyring
Capybara24_11.webp Capybara Phone Holder / Keyring
Capybara24_12.webp Capybara Phone Holder / Keyring
Capybara24_13.webp Capybara Phone Holder / Keyring
Capybara24_15.webp Capybara Phone Holder / Keyring
Capybara24_16.webp Capybara Phone Holder / Keyring
Capybara24_17.webp Capybara Phone Holder / Keyring
Capybara24_18.webp Capybara Phone Holder / Keyring
Capybara24_7.webp Capybara Phone Holder / Keyring
Capybara24_8.webp Capybara Phone Holder / Keyring
Capybara_keychain_how-to_43.jpg Capybara Phone Holder / Keyring
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 5.9k views
  • 34 likes
  • 687 downloads
  • 5 collections
License
3D design format
STL and ZIP Folder details Close
  • CapybaraV12-keyring.stl
  • CapybaraV12-keyring_HOLES.stl
  • CapybaraV12-long.stl
  • CapybaraV12-long_HOLES.stl
  • CapybaraV12.stl
  • CapybaraV12_HOLES.stl
  • CapybaraV12_HOLES_PHONE-reversed_06mm.stl
  • CapybaraV12_HOLES_PHONE-reversed_07mm.stl
  • CapybaraV12_HOLES_PHONE-reversed_08mm.stl
  • CapybaraV12_HOLES_PHONE-reversed_09mm.stl
  • CapybaraV12_HOLES_PHONE-reversed_10mm.stl
  • CapybaraV12_HOLES_PHONE-reversed_11mm.stl
  • CapybaraV12_HOLES_PHONE-reversed_12mm.stl
  • CapybaraV12_HOLES_PHONE-reversed_13mm.stl
  • CapybaraV12_HOLES_PHONE-reversed_14mm.stl
  • CapybaraV12_HOLES_PHONE-reversed_15mm.stl
  • CapybaraV12_HOLES_PHONE-reversed_16mm.stl
  • CapybaraV12_HOLES_PHONE_06mm.stl
  • CapybaraV12_HOLES_PHONE_07mm.stl
  • CapybaraV12_HOLES_PHONE_08mm.stl
  • CapybaraV12_HOLES_PHONE_09mm.stl
  • CapybaraV12_HOLES_PHONE_10mm.stl
  • CapybaraV12_HOLES_PHONE_11mm.stl
  • CapybaraV12_HOLES_PHONE_12mm.stl
  • CapybaraV12_HOLES_PHONE_13mm.stl
  • CapybaraV12_HOLES_PHONE_14mm.stl
  • CapybaraV12_HOLES_PHONE_15mm.stl
  • CapybaraV12_HOLES_PHONE_16mm.stl
  • CapybaraV12_PHONE-reversed_06mm.stl
  • CapybaraV12_PHONE-reversed_07mm.stl
  • CapybaraV12_PHONE-reversed_08mm.stl
  • CapybaraV12_PHONE-reversed_09mm.stl
  • CapybaraV12_PHONE-reversed_10mm.stl
  • CapybaraV12_PHONE-reversed_11mm.stl
  • CapybaraV12_PHONE-reversed_12mm.stl
  • CapybaraV12_PHONE-reversed_13mm.stl
  • CapybaraV12_PHONE-reversed_14mm.stl
  • CapybaraV12_PHONE-reversed_15mm.stl
  • CapybaraV12_PHONE-reversed_16mm.stl
  • CapybaraV12_PHONE_06mm.stl
  • CapybaraV12_PHONE_07mm.stl
  • CapybaraV12_PHONE_08mm.stl
  • CapybaraV12_PHONE_09mm.stl
  • CapybaraV12_PHONE_10mm.stl
  • CapybaraV12_PHONE_11mm.stl
  • CapybaraV12_PHONE_12mm.stl
  • CapybaraV12_PHONE_13mm.stl
  • CapybaraV12_PHONE_14mm.stl
  • CapybaraV12_PHONE_15mm.stl
  • CapybaraV12_PHONE_16mm.stl
  • CapybaraV12_keyring-addon_back.stl
  • CapybaraV12_keyring-addon_front.stl
  • v11.zip

Learn more about the formats
Last update 2024-04-14 at 17:41
Publication date 2023-08-12 at 10:09
Design number 1380922
c47

c47

3D printer file info

3D model description

Easy to print low-poly model of Capybara made to hold the smartphone
Version v1.2 - 14 IV 2024

There is a front (head in front of the screen) and reversed (head behind phone) model and a full model without a hole for a phone

Additionally there are keyring addons (to front or back) that you can use with a desired Capybara model

In files there is also V11.zip file with older version of capybara if you like it more
More about changes on the bottom in Updates section

If you want to sell prints of this models you can buy a Commercial License here:
https://cults3d.com/en/3d-model/gadget/capybara-phone-holder-keyring-commercial-license

See more designs in my Phone Collection
https://cults3d.com/en/design-collections/c47/phone

Printing Timelapse of 3 capybaras (v1.0)
https://www.instagram.com/p/Cv1zEdfNVQ-

Number in file names is a space for a phone in mm
For phone thickness of 6-16mm - they are also on the bottom of models to show what size it is after print

To resize the models use the equasion:
'Needed space (in milimeters)' divided by 'model number' multiplied by 100% = 'Needed model size in percent'
For example if you need more stable 16mm you can take 10mm version resized to: 16 / 10 * 100% = 160%

May not be suitable for phone set vertically but it depends on phone size and its weight
The smaller the gap between the print and a phone the better chance it will not fall
Reversed version may be better for this
You can also resize smaller version to the bigger size
Version 1.2 is longer so it should be more stable than older models

The gap is cut with 16dgr angle

To make a keyring use a Capybara model of your choice and add there a keyring model (back or front). Version for back can be moved to different place and rotated (for example if you want it on side of capybara)
Then merge both models - see a screen from Cura and PrusaSlicer on the last photo
Keyring models are with a 'frame', a flat surface that will not be printed. This way it is easy to set it in the right spot with a Capybara - Ignore model 'errors' and DO NOT try to 'fix' the model

Solid version of Capybara (without a hole for a phone) is with a sepparate files that are already with a keyring
CapybaraV12-keyring
CapybaraV12-keyring_HOLES

CapybaraV12-long is a longer version, the same as used for phones
Use a CapybaraV12_keyring-addon_back file with it

HOLES version
For a filament string used as eyes - usually a black one
Push it in with a pliers, then cut it with cutting pliers or a knife (be carefull to not damage the print or yourself)
Then you can use some a heatgun, small torch or a lighter to smooth the cutted end

Update 16 VIII 2023
Small change to sides and back of the model. Will be easier to print and use with a kechain
Added keychain models

Update 29 VIII 2023
Changed from versions 12-16mm to 10-15mm with more precise angles
You can resize the model for different phone thickness
Angle changed from ~16,5dgr to 16dgr

Update 31 VIII 2023
Changed Keyring-back addon. Looks and works better
Added photos of a new keyring print

UPDATE 05 I 2024
Added versions for 6-9mm phones

UPDATE 05 IV 2024
Added numbers on the bottom of models to show what size it is after print
Added 'mm' to file names to avoid rare confusions
Added version for 16mm phone
Changed keyring addons a little (should be stronger)
Changed 'C47_3D' on the bottom for easier printing

UPDATE 14 IV 2024 - V1.2
Reshaped some details of a Capybara for a nicer print (better angles so there will be less stair-like layers ). Also the model is little cleaner, especially in the bottom
PHONE versions are longer and with a hole that starts from a lower position - this way it is more stable and can be used with a phone set vertically with much more smartphone models
Reversed version holes now starts from the same position on the back - so now no matter what size version you will print it will look the same with a smartphone
Added HOLES version to use a filemant string as eyes
Keyring_back is longer - so more space for a ring and even more stability
Keyring_front is changed and moved more to front for more space for a ring

3D printing settings

Printed with 0.4mm nozzle
NO supports needed
0.1mm layer height (you can use 0.2mm too)
2 walls
7% gyroic infill (I used no infill with Prusa Slicer that automaticly adds some inner bridges when needed)

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.