Tubular TrueX 5inch - 3d-printable frame

This is the 5" TrueX version of the Tubular frame. Currently only a O3 canopy/mount is available, more on request.

I have 3 designs currently available:

Deadcat - for long-range
WideX - for Freestyle
TrueX - for Racing

More information can be found here: www.eyeflydesigns.com

If you plan on building one or would like to get more info, there is a Discord server dedicated to this frame class. You'll get all the support you need there. I'll do what i can to help.

https://discord.gg/ZBEmBTNHAc

Print instructions:

Best printed with a material that's resistant to impact force - I personally have used PA-CF in the past, lately switched to PLA+ though which has been working fine as well. PLA is too brittle and can get weaker in the sun.

I added the rod lengths in a separate picture. Make sure to cut them wearing a mask in a well ventilated space (I use a dremel outside, hand saw is better as it creates less carbon dusk - but is more of a hazzle).

Will make a video soon about this type of frames.

Regarding the rods:

I'm using these: https://aliexpress.com/item/4000407024494.html
You will need:

1 x 8x7mm
1 x 6x4mm

If you get 2 of the 8x7mm ones, you will be able to build 3 frames. I suggest doing so, so you have quick backup :-)

I you source them elsewhere: Twilled rods are always better and more robust, but pulltruded ones also work (even cheaper).