KeyCap - Shark Attack - Creative Decorative KeyCaps 3D print model

KeyCap - Shark Attack - Creative Decorative KeyCaps

Key sizes: 18x18mm On my profile, there are more different keycaps, and more will be come in future. You can use them to create compositions as you prefer. You can also paint the color you prefer.

I would HIGHLY recommend to print them on a Resin Printer, due to the level of details and the size of the model (very small). I'm not sure about the result on a PLA printer. PS.: the printed model on the photos was made in resin printer.

May require support* depending on the position you print it

I also have a simple key of this model downloadable for free on my profile, so you can test if it works on your keyboard.

Remember: this is more like a decorative model, I do not recommend using it on keys you use oftenly The reason is that the sharks fin and tail can hurt your finger if you press it They were put on top of the key to avoid it, but is still a little risk. I use them on my F9, F10, F11 and F12 - they are keys I don't use much, and can be decorated well