Lungs of the bird - Simson Star Tuning air filter

As there are unfortunately no public air filters for the Star or Habicht, I am making this one available here.

The filter is called the bird's lung, and it fits both visually and functionally.

It is a model that is still under development. The filter is quieter than a T-air filter, but does not yet have a silencer. This will be added adaptively at a later date.

A piece of filter fleece is screwed between the filter holder with 4 screws, the whole apparatus is then attached to the individual wings. The wings themselves are mounted with 2 M4 screws.

The filter is only intended for the M500 engine in conjunction with the Venandi head for M500 engines. If anyone can tell me the difference in intake length so that I can use it on M53/M54 engines, please let me know in the comments.

Other suggestions too, of course.

I hereby expressly prohibit the commercial distribution of the model, the use of the model for commercial purposes, e.g. reproduction in physical form or similar.

(including the paid offer of a printing service from this model)

If you are interested in this model for commercial use, please contact me beforehand.

I recommend Petg, ASA, ABS or PP-CF as the material. Pla will probably neither retain its shape nor remain durable due to the place of use.

The printing parameters must be correct to ensure good layer adhesion.