SPACE WRECK: GOTHIC BOARDING ACTIONS TERRAIN SET BUNDLE SUPER FILE
$16.85 SPACE WRECK: GOTHIC BOARDING ACTIONS TERRAIN SET BUNDLE SUPER FILE
3D
Published 2023-08-16T08:44:08+00:00
This File contains the Bundled version of the Space Wreck Boarding Actions terrain, containing all the BASIC and EXPANSION files. For other add-ons, check out the Space Wreck Terrain Set Collection. More info on the terrain set in the Kickstarter Campaign page.
++++
This is a multipart model with mechanisms that prints in place, no need for assembly.
++++
I created this terrain set with a particular goal in mind: print the Boarding Actions terrain set without spending 200$ in the process.
I know this design is NOT the most detailed out there. There are a couple of artists that have sucessfully reproduced GW joint system and level of detail... But those designs were not thougt for the needs of filament printers, nor with economy and ease of print in mind.
The Boarding Actions or Killteam terrain consists of a LOT of pieces of terrain. If you try to print all that in resin, you are going to feel it in your bags. The Space Wreck terrain set prints in about 70h in my BambuLab P1P, and eats up 1.4kg of PLA (roughly 23€ for me). If you only want the KT half, those ammounts are halved.
If you try to print any other design that has not been optimized to print without supports nor infill... You're going to end up paying a lot of money in plastic. And if you try to print the terrain set in resin ... RIP your wallet.
I believe that this Boarding Actions terrain set is one the cheapest to print out there, and strikes a nice balance of printability, time and material savings, and nice aesthetic vibe.
++++
Anyhow, am thrilled to bring you this terrain set, specially designed to be compatible with the Boarding Actions game mode, but also with other game systems such as Killteam, Warcry, or dungeon based RPGs such as DnD or Rogue trader.
The terrain is comprised of a set of walls, pillars and detail pieces, that connect using a calibrated sliding joint, and allow for the creation of modular maps following a 4x4 inches grid, suitable to recreate the grimdark atmosphere of the intricate abandoned corridors of a derelict gothic spaceship.
| Date published | 16/08/2023 |
| Price | $16.85 |
Printed on my Phrozen Sonic Mini 4k at 30 µm layer height. Fantastic model, and the doors even open! Had to wiggle it a bit after curing but still, I am impressed! Everything fits nicely together and I didn't need supports either. So glad I purchased this!