Genshin Impact - Lynette Cape Accessories

This model is designed for Lynette's cosplay from Genshin Impact.

It comes with 3 parts located on the cape on her left shoulder.

All the parts come with a flat face that can easily lay on the print bed and attach any sort of safety pin or clip.

There is a picture with parts labeled with their file names in the preview section which you can refer to.

Part A is the accessory on the tip of the cloth that lay down from the cape. If you are using a thick fabric, Eva, or leather for this part, you will need to print the "sandwich" file included. It is a thickness extension for part A. Scale the thickness of the sandwich according to the thickness of your cloth. The default thickness is set at 1mm. There is a picture in the preview section which can give you a better view. You can also print just one side if you only need it for as a simple appearance.

Part B is the small diamond shape accessory located on the cloth lay down from the cape. If it is too small for your printer to print, you can choose to replicate it with a ready-made accessory with a similar shape.

Part C is the accessory on the cape which come in two parts the badge and the rosette ribbon. You can choose to print the rosette ribbon if you have difficulty making it yourself. I will strongly suggest you make it with ribbon or other software material for a natural look. The rosette ribbon comes cut out on top as a guide for you to attach the badge. Therefore, remember to scale them using the same scale factor if any.

For scaling. all the parts can be scaled using individual scale factors.

Cheers and Happy Printing!

Lynette related:
Genshin Impact - Lynette Clothing Accessories
https://cults3d.com/en/creations/genshin-impact-lynette-clothing-accessories