simple versatile flowerpot Free 3D print model

hello to all! this is one of my first designs with mastercam. its meant to be a flowerpot. however, with some simple scaling in your favorite 3d slicer, teacups, cups, bowls, anything that can hold liquid can be made! if you wanted to use this as a flowerpot id advise using this for smaller plants, as i only have about 20-30% infill on mine, and drilling holes in anything that isnt 100% filled may be met with unwanted bacteria/ wildlife living inside of the design (and 20% infill may use up a full spool, probably like 60% of it, so for infill do about 10%, unless you want a solid pot, then 20% is more than strong enough ). it is a relatively large at 6.5375 in. diameter on top, and a very slightly larger base at 6.75 in. Inside is 5 in. tall. this tool me 14 hours to print. i recommend 230 Celsius and .1 layer thickness, as itll help to have a cleaner look. it also has a small draft, making it slightly larger up top.

The best material to use for this would be ABS, as it is the most proper material that will not collect any bacteria & is 100% safe for indoor & outdoor uses. If made with PLA it should really only be considered novelty. Abs is the proper material!!

THIS IS AN ORIGINAL DESIGN BY ME! -Emanuel Lopez