Hello!
This time, I bring a design that I've been using for my Artillery X1 since I purchased it around 2019. The first photo displays its current state (18/08/2023), and the second is from the year 2019. Next, I will explain various aspects of my design to convince you to choose my proposal and also to address the questions of those who acquire my product (you can also get in touch with me!). Here are some key points:
-This shower basket attaches without the need for any screws or drilling. It secures onto the glass frame, as seen in image 4.
-Unlike the metallic models sold in standard stores, this basket won't leave those hard-to-remove marks due to rust. Additionally, the materials are very gentle, meaning they won't scratch the glass or any other elements.
-As evident from the images, in its standard version, it offers substantial capacity and durability. Additionally, if you have a bathtub or similar space, you can print only the basket and grille to avoid clutter on the floor or other surfaces.
-The grille is sturdy and allows water to drain, drying the various items.
-The original design is intended to be printed with an area of 260x170 mm, so height shouldn't be a concern. I've also redesigned the model to be printable on printers with standard volumes like the Ender 3, or if you prefer a smaller model. In any case, I provide detailed measurements in the plans for added security.
-I've created different models of holding arms: one with a long arm (for large-format printers) and another with a short arm (for standard-format printers).
-Within these two groups, you'll also find versions adjusted for glass of various thicknesses. Refer to the plans labeled with reference E for more details. The thicknesses vary within the two groups: 5, 10, 11, 12, 13, 14, 15, and 20 mm.
-Both the basket and grille, as well as the arm, can be printed without the need for supports. Remember that versions are available for both large-format and standard-format printers.
Printing Guide and Materials:
Basket:
-Use PLA or PETG; PETG is preferred.
-It can be printed with a thickness of up to 0.28 mm.
-No supports are required.
-Recommended infill is 20% to 25% or more, depending on the material used.
Grille:
-Use PLA or PETG; PETG is preferred.
-It can be printed with a thickness of up to 0.28 mm.
-No supports are required.
-Recommended infill is 20% to 25% or more, depending on the material used.
Arm:
-Use PLA or PETG; PETG is highly recommended.
-It can be printed with a thickness of up to 0.28 mm.
-No supports are required.
-Recommended infill is 25% or more, depending on the material used.
If you have any questions or need to adjust any parameters (such as glass measurements or arm length), feel free to get in touch with me.
BYE BYE BYE BYE
////////////////////////////////////////////////////////////////////////
¡Hola!
Esta vez traigo un diseño que he estado utilizado pro mi cuenta desde que compre mi Artillery X1 en el 2019 aproximadamente. La primera foto muestra su estado actual (18/08/2023) y la segunda es del año 2019. A continuación, explicaré en diferentes apartados mi diseño para convencerte de que elijas mi propuesta y también para resolver las dudas de aquellos que adquieran mi producto (¡también puedes contactarme!). Aquí van algunos puntos clave:
-Esta cesta para la ducha se acopla sin necesidad de utilizar ningún tipo de tornillería ni hacer agujeros. Se sujeta al marco del cristal, como se puede ver en la imagen 4.
-A diferencia de los modelos metálicos que se venden en tiendas estándar, esta cesta no deja esas marcas difíciles de quitar debido al óxido. Además, los materiales son muy nobles, lo que significa que no rayarán el cristal ni ningún otro elemento.
-Como se puede observar en las imágenes, en su versión estándar, tiene una gran capacidad yb resistencia. Además, si tienes una bañera u otro espacio similar, puedes imprimir solo la cesta y la reja para evitar tener todo tirado en el suelo u otro lugar.
-La reja es resistente y permite que el agua escurra para secar los diferentes elementos.
-El diseño original está pensado para ser impreso con un área de 260x170 mm, por lo que la altura no debería ser un problema. También he rediseñado el modelo para que pueda ser impreso en impresoras con un volumen estándar como la Ender 3, o si prefieres un modelo más pequeño. De todas formas, proporciono capturas de planos con medidas más detalladas para mayor seguridad.
-He creado diferentes modelos de brazos sujetadores: uno con brazo largo (para impresoras de gran formato) y otro con brazo corto (para impresoras de formato estándar).
-Dentro de estos dos grupos, también encontrarás versiones adaptadas para cristales de diferentes espesores. Consulta los planos con la referencia E para más detalles. Los espesores varían en los dos grupos: 5, 10, 11, 12, 13, 14, 15 y 20 mm.
-Tanto la cesta como la reja y el brazo pueden imprimirse sin necesidad de utilizar soportes. Recuerda que hay versiones disponibles para impresoras de gran formato y formato estándar.
Guía para imprimir y materiales:
Cesta:
-Utiliza PLA o PETG; se prefiere PETG.
-Puede imprimirse con un grosor de hasta 0,28 mm.
-No se requieren soportes.
-El relleno recomendado es del 20% al 25% o más, según el material utilizado.
Reja:
-Utiliza PLA o PETG; se prefiere PETG.
-Puede imprimirse con un grosor de hasta 0,28 mm.
-No se requieren soportes.
-El relleno recomendado es del 20% al 25% o más, según el material utilizado.
-Brazo:
Utiliza PLA o PETG; se recomienda encarecidamente PETG.
-Puede imprimirse con un grosor de hasta 0,28 mm.
-No se requieren soportes.
-El relleno recomendado es del 25% o más, según el material utilizado.
Si tienes alguna pregunta o necesitas modificar algún parámetro (como las medidas del cristal o la longitud de los brazos), no dudes en ponerte en contacto conmigo.
BYE BYE BYE BYE