1:200 Nanchang Q-5 Fantan

Chinese aircraft developed from the Shenyang J-6 (a Chinese copy of the MiG-19) as a low-flying attack aircraft.
Approximately 1300 aircraft produced in various variants from 1969 to 2012; the latest models can be equipped with highly accurate guided weapons.
The Fantan has equipped the air forces of China, Pakistan, Myanmar and Bangladesh.

Models:
Generic configuration that can cover most models of the Q-5A family and the A-5C export variant, Q-5L equipped with laser illuminator and the two seat variant Q-5J.

Configurations:

FANTAN_Q5_N0 clean without pylons;
FANTAN_Q5_N1 4x empty pylons + 2x760L fuel tanks
FANTAN_Q5_N2 6x empty pylons + 2x760L fuel tanks
FANTAN_Q5_N3 8x empty pylons + 2x760L fuel tanks
FANTAN_Q5_N4 10x empty pylons
FANTAN_Q5_N5 6x low drag 216kg bombs + 2x760L fuel tanks
FANTAN_Q5_N6 4x Type 200A bombs + 2x760L fuel tanks +2x7x90mm rocket launcher + 2xPL-2
FANTAN_Q5_N7 4x low alt 240kg bombs + 2x760L fuel tanks +2x7x90mm rocket launcher + 2xPL-2
FANTAN_Q5J_N0 6x empty pylons + 2x760L fuel tanks
FANTAN_Q5L_N0 6x empty pylons + 2x LT-2 LGB + 2x400L fuel tanks

Addon load:
PL-2 IR missile with rail, PL-7 IR missile with rail, 7x90mm rocket launcher, 216kg low drag bomb, 240kg low drag bomb with brake parachute, Type 200A anti-runway bomb, BL-755 cluster bomb.

About the empty pylons use: print fuel tanks and/or rockets/bombs/missiles and glue them to the model or merge all the stl in your slicer and print your custom configuration or use a 3d editor that can read .stl files in order to build your own variant.
Loads and weapon stations (hardpoints) have tiny protrusion to make easy the positioning of ordnance.

Models scale 1:200 made to be printed with a MSLA or a FDM with 0.2 mm nozzle at this scale.

For other scales use the following values into your slicer:
for 1:100 use 200%
for 1:144 use 139%
for 1:200 leave 100%
for 1:285 use 70%
for 1:300 use 66%

At 1:100 it can be used a FDM printer with a 0.4mm nozzle.
Under 1:200 is almost mandatory a resin printer.

Print test:
1:200 made with a MSLA at 50 micron resolution.

This creation is reserved exclusively for private and personal use; redistribution of these files, as they are or modified, is not permitted. For further details read the "Copyright" section in the FAQ section of Cults site by clicking on the (C) symbol below.

ciao