Skip to content

Pilatus PC-21, 1100mm (TEST FILES)

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.1k views
  • 7 likes
  • 115 downloads
License
3D design format
PDF and ZIP Folder details Close
  • PILATUS PC-21 1100MM ASSEMBLY MANUAL.pdf
  • Pilatus PC-21 1100mm print settings.pdf
  • cura settings.pdf
  • pc-21 test parts.zip
    • Cura profiles/COLORFABB LW-PLA.curaprofile
    • Cura profiles/PLA_direct_drive.curaprofile
    • Cura profiles/REGULAR PLA.curaprofile
    • part files/FFF for S3D/fuselage/canopy front.factory
    • part files/FFF for S3D/fuselage/canopy middle (clear pla).factory
    • part files/FFF for S3D/fuselage/canopy rear (clear pla).factory
    • part files/FFF for S3D/fuselage/cowling mounts.factory
    • part files/FFF for S3D/fuselage/cowling.factory
    • part files/FFF for S3D/fuselage/exhausts.factory
    • part files/FFF for S3D/fuselage/fuse 1.factory
    • part files/FFF for S3D/fuselage/fuse 2.factory
    • part files/FFF for S3D/fuselage/fuse 3.factory
    • part files/FFF for S3D/fuselage/fuse 4.factory
    • part files/FFF for S3D/fuselage/fuse 5.factory
    • part files/FFF for S3D/fuselage/fuse 6.factory
    • part files/FFF for S3D/fuselage/fuse 7.factory
    • part files/FFF for S3D/fuselage/fuse 8.factory
    • part files/FFF for S3D/fuselage/motor stand off mounts.factory
    • part files/FFF for S3D/fuselage/nose gear door left.factory
    • part files/FFF for S3D/fuselage/nose gear door right.factory
    • part files/FFF for S3D/fuselage/nose gear hinge mounts.factory
    • part files/FFF for S3D/fuselage/nose wheel steering arm.factory
    • part files/FFF for S3D/fuselage/tail light cover.factory
    • part files/FFF for S3D/propeller/11x10 blade.factory
    • part files/FFF for S3D/propeller/3 inch spinner - shaft spacer.factory
    • part files/FFF for S3D/propeller/5 blade hub.factory
    • part files/FFF for S3D/propeller/spinner cone.factory
    • part files/FFF for S3D/tail/elevator left.factory
    • part files/FFF for S3D/tail/elevator right.factory
    • part files/FFF for S3D/tail/horizontal stabilizer left.factory
    • part files/FFF for S3D/tail/horizontal stabilizer right.factory
    • part files/FFF for S3D/tail/rudder.factory
    • part files/FFF for S3D/tail/vertical stabilizer antenna.factory
    • part files/FFF for S3D/tail/vertical stabilizer front.factory
    • part files/FFF for S3D/tail/vertical stabilizer rear.factory
    • part files/gcode/fuselage/Canopy front.gcode
    • part files/gcode/fuselage/canopy middle (clear pla).gcode
    • part files/gcode/fuselage/canopy rear (clear pla).gcode
    • part files/gcode/fuselage/cowling mounts.gcode
    • part files/gcode/fuselage/cowling.gcode
    • part files/gcode/fuselage/exhausts.gcode
    • part files/gcode/fuselage/fuse 1.gcode
    • part files/gcode/fuselage/fuse 2.gcode
    • part files/gcode/fuselage/fuse 3.gcode
    • part files/gcode/fuselage/fuse 4.gcode
    • part files/gcode/fuselage/fuse 5.gcode
    • part files/gcode/fuselage/fuse 6.gcode
    • part files/gcode/fuselage/fuse 7.gcode
    • part files/gcode/fuselage/fuse 8.gcode
    • part files/gcode/fuselage/motor stand off mounts.gcode
    • part files/gcode/fuselage/nose gear door hinges.gcode
    • part files/gcode/fuselage/nose gear door left.gcode
    • part files/gcode/fuselage/nose gear door right.gcode
    • part files/gcode/fuselage/nose wheel steering arm.gcode
    • part files/gcode/fuselage/tail nav light cover.gcode
    • part files/gcode/propeller/11x10 Blade x5.gcode
    • part files/gcode/propeller/3 inch spinner - shaft spacer.gcode
    • part files/gcode/propeller/5 blade hub.gcode
    • part files/gcode/propeller/spinner cone.gcode
    • part files/gcode/tail/elevator left.gcode
    • part files/gcode/tail/elevator right.gcode
    • part files/gcode/tail/horizontal stabilizer left.gcode
    • part files/gcode/tail/horizontal stabilizer right.gcode
    • part files/gcode/tail/rudder.gcode
    • part files/gcode/tail/vertical stabilizer antenna.gcode
    • part files/gcode/tail/vertical stabilizer front.gcode
    • part files/gcode/tail/Vertical stabilizer rear.gcode
    • part files/stl/bed disk.stl
    • part files/stl/fuselage/canopy front.stl
    • part files/stl/fuselage/canopy middle.stl
    • part files/stl/fuselage/canopy rear.stl
    • part files/stl/fuselage/cowling mount.stl
    • part files/stl/fuselage/cowling.stl
    • part files/stl/fuselage/exhaust lower left.stl
    • part files/stl/fuselage/exhaust lower right.stl
    • part files/stl/fuselage/exhaust upper left.stl
    • part files/stl/fuselage/exhaust upper right.stl
    • part files/stl/fuselage/fuse 1.stl
    • part files/stl/fuselage/fuse 2.stl
    • part files/stl/fuselage/fuse 3.stl
    • part files/stl/fuselage/fuse 4.stl
    • part files/stl/fuselage/fuse 5.stl
    • part files/stl/fuselage/fuse 6.stl
    • part files/stl/fuselage/fuse 7.stl
    • part files/stl/fuselage/fuse 8.stl
    • part files/stl/fuselage/motor stand off mount.stl
    • part files/stl/fuselage/nose gear door front left.stl
    • part files/stl/fuselage/nose gear door front right.stl
    • part files/stl/fuselage/nose gear door hinge front left.stl
    • part files/stl/fuselage/nose gear door hinge front right.stl
    • part files/stl/fuselage/nose gear door hinge middle left.stl
    • part files/stl/fuselage/nose gear door hinge middle right.stl
    • part files/stl/fuselage/nose gear door hinge rear left.stl
    • part files/stl/fuselage/nose gear door hinge rear right.stl
    • part files/stl/fuselage/nose gear door rear left.stl
    • part files/stl/fuselage/nose gear door rear right.stl
    • part files/stl/fuselage/nose wheel steering arm.stl
    • part files/stl/fuselage/tail nav light cover.stl
    • part files/stl/propeller/11x10 blade.stl
    • part files/stl/propeller/3 inch spinner - shaft spacer.stl
    • part files/stl/propeller/5 blade hub.stl
    • part files/stl/propeller/finished v2.stl
    • part files/stl/propeller/spinner cone.stl
    • part files/stl/tail/elevator inner left.stl
    • part files/stl/tail/elevator inner right.stl
    • part files/stl/tail/elevator middle left.stl
    • part files/stl/tail/elevator middle right.stl
    • part files/stl/tail/elevator outer left.stl
    • part files/stl/tail/elevator outer right.stl
    • part files/stl/tail/horizontal stabilizer left.stl
    • part files/stl/tail/horizontal stabilizer right.stl
    • part files/stl/tail/rudder lower middle.stl
    • part files/stl/tail/rudder lower.stl
    • part files/stl/tail/rudder upper .stl
    • part files/stl/tail/rudder upper middle.stl
    • part files/stl/tail/vertical stabilizer antenna left.stl
    • part files/stl/tail/vertical stabilizer antenna right.stl
    • part files/stl/tail/vertical stabilizer front.stl
    • part files/stl/tail/vertical stabilizer rear.stl

Learn more about the formats
Last update 2023-10-05 at 11:04
Publication date 2023-08-22 at 17:58
Design number 1402097
Aeroworks3d

Aeroworks3d

3D printer file info

3D model description

This scale accurate replica of the Pilatus PC-21 is designed for quick and easy construction and printed using regular PLA. Designed to suit the 4250 800kv motor this model has a significant amount of power and is happy to cruise around at 40% power on 4s. Utilizing 6 channels; Ailerons, Elevator, Flaps, Rudder,Throttle and retractable sprung landing gear, this model is sure to turn some heads at the local flying field. Links to components used can be found on the last page of the user guide. The modular design means it has the capability to be broken down into smaller sections for either easy transporting or changing parts should it be required.

COOL FEATURES:

Scale Flaps - The flaps for this model have been designed to be as close to scale as possible. Actuating from a lowered pivot point, They extend back and out to maximize lift. They are held to the wings and flaps with m2 screws and are removable should the need for servicing arise.

Functional Exhausts - The exhausts have been implemented on the cowling to allow for airflow to escape after entering through the intake, thus making them functional in cooling the motor and ESC.

5 Bladed printed Propeller - The very scale looking 5 bladed propeller offers the final touch in scale appearance. Although reducing the top end speed performance, the low speed torque and power is increased over the stock 2 blade option. Note: This 5 bladed propeller introduces increased torque and adverse yaw effects at slow speed. Although these effects are only low to moderate, it is recommended to begin flying this model on the 2 bladed propeller and work your way up to the 5 bladed propeller.

Modular design - We strive to make our models last, however sometimes damage does happen. With the modular design, if you damage a section of the model, you can simply unscrew it from the main assembly and print a new section.

Sprung landing gear - We have teamed up with “Flit models” to produce scale landing gear specifically for this model. In doing so this model has sprung landing gear which makes landing on even the bumpiest strips a walk in the park. It also takes those “less than perfect” landings with ease without doing damage to the wing or fuselage structures.

LED lighting - This model has been designed to take 5mm LED’s. Featuring landing lights, navigational lights, tail beacon and nose gear strut lights. This model will stand out against the other printed planes at your field.

HANDY FEATURES:

removable wing - the wing is held on with x3 nylon bolts for ease of transport.

removable tail surfaces - vertical and horizontal stabilizers are held on with m2 screws so they can be removed for transport or if needing to be changed.

FULL files here:
https://cults3d.com/en/3d-model/various/pilatus-pc-21-1100mm

Flight video here:
https://www.youtube.com/watch?v=v_Ylc-CQlgI

https://www.youtube.com/watch?v=BfkiM0q9lE8&t

https://www.youtube.com/watch?v=TYOcZuPdVKw
https://www.youtube.com/watch?v=c-EpETAVUxQ
https://www.youtube.com/watch?v=GXO-lMUs2e4

GENERAL SPECIFICATIONS
WINGSPAN: 1100mm
PRINT WEIGHT: 1600g

FLYING WEIGHT: 2800g
CENTER OF GRAVITY 83mm aft of L.E at wing root. (Marked with indentation)
MINIMUM BED SIZE 220x220x250

ELECTRICS
MOTOR: 4250 800kv

ESC: 60 amp (min)
SERVOS: standard 9g and 21g

BATTERY: 4000mah 4S 50c (440g) (or similar)

INCLUDED WITH THESE FILES
Factory files for Simplify 3d
STL files
G-CODE files
CURA Profiles
Detailed assembly manual and user guide
Print settings guide for all parts
part orientation images

REQUIRED COMPONENTS:
X1 4250 800kv
X1 12x8 propeller (OPTIONAL)
X1 3inch spinner (OPTIONAL)
X1 80amp esc
X1 4000mah 4s 50c LIPO (440g)
X2 9g servo
X4 21g servo (HK15148 or similar)
X3 2.5kg 90deg retracts 4mm pin (one
with steerable nose wheel)
X1 landing nose gear leg 120mm long,
4mm pin
X2 landing main gear leg 140mm long,
4mm pin
1mm Piano wire (Aileron pushrods)
X2 1.2mm Piano wire (650mm min)
X6 10mm X 10mm X 2mm Magnet
(ROUND)
X10 16x29mm nylon hinges
X4 m1.3 linkage stopper
M1.6 screws (5mm)
M2 screws (5mm, 6mm, 10mm, 14mm,
20mm)
X3 10mm round carbon tube (500mm)
X1 3mm square carbon tube (90mm)
X1 6mm wooden dowel (400mm, Elevator
spar)
20 lbs Braided fishing line (or similar - Nose wheel steering)
Velcro (Battery and esc fixing)
Bamboo skewers 3mm (Alignment pins)
Small extension spring 0.3mm (Nose gear doors return springs)
light gauge wire (30AWG) (3m min)
MPX 8 pin plugs (OPTIONAL)

MINIMUM PRINT VOLUME:
220x220x250

For any questions and assistance please email us at:

aeroworks3d@outlook.com

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.