BJD 1/3 75MM HEAD - ALMOST HUMAN 2 - BY SPARX

This file contains ONLY one head and cap . .Head H002 – Henry BJD doll face and expression. This Cap only fits “Almost Human Heads” due to the face been a bit more realistic..

A Lack of Male BJD heads available, to create a human male doll . . this Head was created a while back and modified to create a BJD Doll Head. as a shared commission to resemble “a Superman” or “a Sherlock” or “a Witcher” you choose. It is a standard 1/3 BJD doll body fitting.

Should your doll not fit the head socket I have included a neck piece for you to print/cut/shape to fit your chosen body.

This model can take 14mm eyes not 18mm eyes . .
25mm neck joint, 14mm eyes you can scale them up or down to fit your doll body. Be aware that the ball joint and eye sockets will change! Also I have printed at 1/6 doll size on resin but at that size FDM will not form eyes at 2mm diameter!
So as I know some of you WILL scale the head down I have included a painted eyes version that has fixed eyes . .

These are all new heads/skulls designed from scratch, no remixing, STL’s OBJ files or other heads have been used in the designs intentionally. All designs have used either/and Internet photo’s, art work, my own designs etc. . . references for head sizes and fittings from various manufacturers.

This series of heads are designed to fit 115 x 65 x 155 resin build plate as well as FDM printers.

2 x Heads with and without eye sockets
1 x skull cap vh4
1 neck adaptor
4 files in total

I SHARE MY WORK FOR OTHERS TO ENJOY. . .PLEASE DO NOT SHARE THESE FILES ON SOCIAL MEDIA OR OTHER WEBSITES. LINKS TO THIS PAGE ARE ACCEPTED
Info;
Lots of files for sale and free of BJD dolls heads. Unfortunately they are either very expensive or not scaled to fit smaller resin printers . .
Each head is very reasonably priced or free for the detail.
Each head is complete with a Head Cap
Heads are orientated for FDM and resin printers to use the least amount of supports as well as keep supports away from face. Please feel free to orientate them yourself . .
No Instructions with this one as All of the parts are orientated to print base ready to print with your favourite slicer . .

All the parts have been printed and developed to print, A lot of prints have been produced to test design and fit. All heads have been fitted to dolls/painted etc without problems . .

All of my models are only released when they can print! so please do not remix or "fix" faults in this model then republish! If there is a fault then let me know . . message me I will answer and fix problem. . apart from that print make enjoy.
I make these models for my own collections and friends but I am always open to suggestions of content for models that cover the DC and Marvel universe as well as TV and film cult images e.g. Barbarella. so message me if you have any ideas . .
As always enjoy the parts on offer.
I SHARE MY WORK FOR OTHERS TO ENJOY. . .

3D PRINTING SETTINGS
Parts are NOT orientated for print see pics for orientation.