COMMERCIAL USE-BONSAI POT DESIGN 004

SELL bonsai pots for cheap price and earn profits

Since Bonsai pots are generally expensive you can earn profits selling 3d printed bonsai pots fulfilling the needs of bonsai enthusiasts worldwide. You can color them as desired (you can get a better idea about coloring bonsai pots by googling bonsai pots). These pots are designed perfectly to fulfill the requirements of bonsai potting.

Please mention that you are a licensed seller of HOBBYTIMES in your product description when you sell your products designed by HOBBYTIMES. Please note that you cannot sell digital files bought from HOBBYTIMES under any license condition.

3D files are uploaded in a ZIP file.
Don't forget to post a remake 😊

You can print with default settings in your slicer. Pot and legs are designed separately to reduce support material waste. You can print the water tray and drain mesh only if needed.
I recommend 0.4mm nozzle for better quality. I have set support overhang angle to 60 degrees to reduce support materials. however you need to enable supports to print the leg cavities in the main body. You will have to glue the legs to fix them to the pot after print. If your bed is not perfectly leveled you may need to remove some materials from the edges of the legs and leg cavities to fix the legs. you can use PLA or PETG depending on the environment where you going to put your bonsai pot (recommend PETG if the bonsai pot gets direct sunlight) .
Dimensions (pot only)
- length : 211mm
- width : 132mm
- height : 37mm (without legs )