BMW phone holder

This 3D creation is an elegant and functional stand, adorned with the iconic BMW logo. Precision-crafted for dedicated fans, this stand is not only a collector's item but also a practical item for resting your cell phone.

For more information, please contact me: robin.jarlaudcults@outlook.fr

1.infill adjustment :

      Infill determines the internal density of your


      model. The higher the infill percentage, the more


      your model will be.


      For decorative objects, a filling of 15% to 20% is recommended.


     is often sufficient.


     For functional or resistant objects, opt for a


     filling, such as 30% to 50%.

2.type of support :

     If your model has overhanging parts or areas


     complex areas, you may need to add supports.


     Supports are temporary structures that


     allow cantilevered parts to be printed without


     sagging.


     You can choose between automatic supports


     (generated automatically by the software) or supports


     (which you design yourself).


    I RECOMMEND PRINTING WITH


     ARBORESCENCE

3.print speed :

Print speed determines how quickly your


model is printed.


For high-quality prints, a slower speed


is recommended (e.g. 40 mm/s).


For faster prints, you can increase the


speed (e.g. 60 mm/s).


I PERSONALLY PRINT AT 50mm/s

Don't forget to check other parameters such as extrusion temperature, layer height, and cooling for best results. Happy printing! 🚀

I advise:

Temperature for PLA: Nozzle 200°C and Plate 60°C

Printing speed: 50 mm/s

Layer height: 2mm

Filling: 20% and cubic filling

Support: tree support

I recommend printing the model on its side so that it requires only 1 support

I print with an Ender 3 Pro

For more information, please contact me: robin.jarlaudcults@outlook.fr