Alfa 184T F1 - Printable model KIT

Get ready to print this fantastic Alfa Romeo F1 car from Season 1984.

One of the best looking cars of the Turbo Era.
Driven by Riccardo Patrese, this specific KIT depicts the MONZA Version.
Patrese scored a great 3rd place, the last podium for an Alfa in F1 so far!

The model is curbside but very detailed.
This is not a videogame extraction, but a fully 3d designed model.
High poly STL.
A huge study of photographic reference was done to get the best result.

This KIT is intended to be printed using RESIN printers.

• Sponsor PDF file INCLUDED!
• Assembly schematic INCLUDED.

Please Note: Sponsor PDF is 1/12 scale.
If you need decals in 1/20 scale please edit the PDF and set 60% scale using a graphic editor like Corel Draw, Adobe Illustrator, etc.

NOTE: the 3D model is provided in 1:1 scale (100%)
Set the following scale in you Slicer (Chitubox, Lychee, etc) to adapt the size you prefer:
1/12 --> 8,333%
1/18 --> 5,555%
1/20 --> 5%

1:12 and 1:20 scale print were tested.
NOTE: Printing in 1:43 could be tricky due to thin walls.
The painted model shown in picture is 1:12 scale.
The unpainted models shown in picture are 1:20 scale.

This KIT is intended for RESIN printers and skilled modelers.
Some post process adjustment must be taken into account during assembly.

NOTE: Several parts must be printed MIRRORED to build both sides of the model.