Mini multi camera webcam anchor to corner or aluminum profiles with T-slot V-Slot Track

This time I am sharing a small bracket / anchor for installation of various camera models on profiles with T-slot V-Slot Rail or Ender 6 right corner.

The bracket set is valid on cameras that can be fixed by a screw or have a ¼" metric nut (The standard in photography, tripods, webcam cameras, etc).

Includes two base mounting brackets, as well as two camera anchors:

-Right corner bracket Ender 6

-Support for profiles with T-slot V-Slot Rail (standard ones used in 3D printers)

-Screw anchoring up to the camera.

-Anchoring by means of metric ¼" thread in chamber.

The assembly is adjustable in inclination, rotation (both shaft and chamber), front advance in case of Ender 6 fastening or lateral for fastening on T profiles V-Slot Rail.

After testing several cameras, I stayed with Angetube Streaming webcam, among other things because it has streaming and is compatible with Sonic Pad, also adds a ring of light that allows timelapse only with such lighting, the image quality is good and is complemented by a remote control to adjust the area to be filmed and zoom. Summary: Angetube Streaming Webcam with Microphone - 1080P 60FPS USB Webcam with Ring Light and Remote Control - 5X Digital Zoom HD Webcam Built-in Privacy Cover

Installation with the AngeTube camera is simple, can be done easily and without losing the warranty. Just peel off the rubber cover that is under the camera and you will find the screw that fixes the camera to the original bracket, simply unscrew it to stay only with the camera and attach the anchor piece reusing the original screw.

To install the bracket on the Ender-6 it is not necessary to touch anything, it is only anchored with two M3 T-nuts.

The axle joint requires a 16mm M3 bolt and an M3S insert nut (all standard, inexpensive and frequently used). You can also put in a standard M3 bolt and hex nut.

There are several parts that are common for different types of assembly and other specific, you must print according to the assembly you decide, they are small, take little time and consume only several grams of filament. If you have doubts you can send me a note.

The bracket allows to remove and put the camera without disassembling anything, likewise its final height allows the use of the methacrylate cover in the case of Ender-6.

I include a photo so that you can observe the framing obtained from the right corner on an Ender 6.

I hope you find it useful, as always it's just print and go.

Remember that all the pieces that I publish, I use and print them several times until I am happy with them, all are compatible between my publications. If you have any questions you can drop me a note.

It can be printed in PLA or more technical materials. The version of the photos is in PLA, 4 layers, 1mm top and bottom, 50% density and zigzag.