BEE KEYCHAIN

Add a touch of sweetness and elegance to your routine with our charming minimalist bee keychain. With a delicate design and precise details, this keychain is perfect for those seeking a touch of understated style. Made with high-quality materials, it's durable and built to withstand daily use. Whether for your own keys or as a delightful gift, the minimalist bee keychain is a unique choice that will surely captivate.

Here are the suggested 3D print settings for the STL Bee Keychain file with dimensions of 7.2cm x 9cm:

Material: It is recommended to use PLA (Polylactic Acid) or ABS (Acrylonitrile Butadiene Styrene) to print the skates. These materials are widely used in 3D printing and offer a good combination of durability and printability.

Layer Height: Set a layer height of approximately 0.2 mm. This value will result in good resolution and a smooth finish for the skates.

Infill: A 20% to 30% infill will be adequate to give the skates the necessary structure and strength.

Print speed: For best results, set a moderate print speed, typically between 40 mm/s and 60 mm/s. This will help ensure good layer adhesion and accurate detail.

Nozzle temperature: Nozzle temperature can vary depending on the type of material you are using. For PLA, a recommended temperature range would be 190°C to 220°C. For ABS, adjust the nozzle temperature between 220°C and 250°C.

Print base: Use a suitable print base surface, such as a heated base with specialized 3D printing adhesive tape or a glass plate with properly applied adhesive. This will help ensure good material adhesion during printing.

Please note that these settings may vary depending on your specific 3D printer and individual preferences. It is always recommended to run a few test prints and make any necessary adjustments to get the best results.