Monster Om Nom

Bring the legendary monster OM NOM to life with our exclusive 3D printable file! Now you can 3D print this adorable and famous character at home. With amazing details and faithfulness to the original version, this file will allow you to create your own piece of art. Get it now and add a touch of 3D magic to your space!"

Here are suggested 3D print settings for the character file with dimensions of 10cm x 12cm:

Material: It is recommended to use PLA (Polylactic Acid) or ABS (Acrylonitrile Butadiene Styrene) to print the skates. These materials are widely used in 3D printing and offer a good combination of durability and printability.

Layer Height: Set a layer height of approximately 0.2mm. This value will result in good resolution and a smooth finish.

Infill: A 20% to 30% infill will be adequate to give the skates the necessary structure and strength.

Print speed: For best results, set a moderate print speed, typically between 40 mm/s and 60 mm/s. This will help ensure good layer adhesion and accurate detail.

Nozzle temperature: Nozzle temperature can vary depending on the type of material you are using. For PLA, a recommended temperature range would be 190°C to 220°C. For ABS, set the nozzle temperature between 220°C and 250°C.

Print base: Use a suitable print base surface, such as a base plate heated with specialized 3D printing tape or a glass plate with properly applied adhesive. This will help ensure good material adhesion during printing.

Please note that these settings may vary depending on your specific 3D printer and individual preferences. It is always recommended to run a few test prints and make any necessary adjustments to get the best results.