Nagoya Jewelry Box CS128-45

Nagoya Modular Stacking Jewelry Boxes

Memories, or maybe dreams, of a winter morning in Nagoya.

This is a set made of components from the Infinite Containers 128 Series
Container:
CS128-45-L

Threaded Lid: LS128-P-TS

Finial: FPM128-91TS

Print as many containers as you need and stack them up as high as you like.

Objects in the photographs were printed on a standard desktop 3D printer, without secondary operations.

About Infinite Containers

Infinite Containers is a collection of modular, stackable containers, lids, stands, extensions, and accessories. It includes hundreds of components of different sizes and shapes, that combine in virtually infinite assemblies to elegantly fit your functional daily needs.

Look through our collections to discover the full potential of our Infinite containers.

The series number (first three digits of the item code) is the diameter in mm of the internal cavity. Components from the same series/diameter fit together, stack, or rotate on top of each other. Containers from different series are larger or smaller in inner diameter but still designed to coordinate. The second number in the item’s code (after the dash) refers to the height of the container when stacked (not including the 4mm nesting base).

For more information about Printable Objects and our designs please visit
printableobjects.com

Max Build Volume: mm 163x X 163y X 49z
Scalable: YES

Nozzle: 0.4
Layer: 0.2 or less
Supports: From platform only for all pieces
Scalable: YES

Tested with: PLA, ABS

PLEASE NOTE:
- The threads in the lid do not require supports, which would be very hard to remove.
- The threaded finial locks into the lid, make sure you screw it in until you feel it lock.
- To easily remove the support from the finial: hold the supports firmly and unscrew the finial.

If you have any questions, please feel free to email us directly or ask in the comments.