UV resin curing cabinet/ Resin cure

I have designed a curing cabinet for UV resin, using the lid of an Elegoo Mars 2, a microwave dish motor, a wifi sonoff relay and a UV led strip.

The design is finished, but I will continue to make some improvement that I will incorporate when finished.

The strengths are the low cost, the features offered by the wifi relay, Alexa, google, etc., the simplicity, because of the microwave engine, and the ease of construction.

I have also incorporated a lid made from printed profiles, as not everyone will have an Elegoo Mars 2 or 2 pro lid.

For added safety, I have incorporated a switch that turns off the UV light when the lid is lifted, as a precaution.

I have no objection to making any modifications if the materials you have are different, motor, power connectors etc, just ask and be patient.

I have designed a curing booth for UV resin, using the lid of an Elegoo Mars 2, a microwave dish motor, a sonoff wifi relay and a strip of UV leds.

The design is finished, but I am making some improvement that I want to incomporar to the final design, I will upload the finished photos and the stl when they are final, but I publish because I am willing to receive proposals, therefore feel free.

The strengths are the low cost, the benefits offered by the Wi-Fi relay Alexa, google, etc., the simplicity, by the microwave motor, and the ease of construction.

I have also incorporated a cover made with printed profiles, since not everyone will have a cover of Elegoo Mars 2 or 2 pro. For added safety,

I've incorporated a switch that turns off the UV light when the lid is lifted, as a precaution.

I have no problem in making any modification if the materials you have are different, motor, power connectors etc, you just have to ask for it and be patient.