Specialized 36mm Spacer for bike

Welcome to the world of cycling innovation! Today we present to you the "Specialized 36mm Spacer for Bike", a bike stem and fork spacer designed to take your cycling experience to the next level.

Product Description:

Advanced Design: Our spacer has been carefully designed using the latest carbon fiber filament 3D printing technology. This not only makes it incredibly lightweight, but also extremely strong and durable.

Perfect Compatibility: The "Specialized 36mm Spacer for Bike" has been designed specifically for bikes, ensuring a perfect fit on your frame. With a height of 36mm, it provides optimal stem lift, allowing you to adjust the handlebar height to your personal preference.

Improves Performance: By adjusting your handlebar height, you can customize your position on the bike for optimal performance. Whether you prefer a more aerodynamic position or a more comfortable one, our spacer gives you the flexibility you need.

Quality Material: The carbon fiber used in the manufacture of this spacer is known for its strength and light weight. This means that it not only enhances the appearance of your bike, but also adds a competitive edge in terms of weight and durability.

Key Benefits:

Perfect fit for Specialized bikes.

Lightweight and strong thanks to carbon fiber.

Customize your position on the bike.

Improves performance and comfort.

Conclusion:

The "Specialized 36mm Spacer for Bike" is the perfect accessory for any cyclist looking to enhance their cycling experience. With an innovative design and high quality materials, this spacer not only improves the functionality of your bike, but also makes it look more stylish. Don't miss the opportunity to take your cycling to the next level with our Specialized spacer!

Questions and Contact:

If you have any questions or would like more information about our product, please feel free to contact us at angelescalonabueno.com.

Thank you for choosing the "Specialized 36mm Spacer for Bike" and enjoy a more comfortable and efficient bike ride!

Extrusion Temperature (Hotend):

Hotend (nozzle) temperature: 200°C

Hotbed Temperature:

Hot bed temperature: 60°C

Print Speed:

Recommended print speed: 50 mm/s

Initial Layer:

Initial layer height (first layers): 0.2 mm (this helps good adhesion to the bed).

Infill (Infill):

Recommended infill: 100% (this will ensure that the spacer is solid and strong).

Supports:

Brackets: brackets are not necessary as the design should not have parts with acute angles that require brackets.

Layer Fan:

Layer Fan: On at 100% after the first layer (this will help to properly cool the carbon fiber PLA and improve print quality).

Layer Height:

Recommended layer height: 0.2 mm (this provides a good balance between print speed and quality).

Remember that these are basic parameters and may vary depending on the specific conditions of your printer and filament. It is always a good idea to do a small test run before printing the final product to adjust the parameters if necessary.

Also, make sure you have a level and clean printing surface for good adhesion. good luck with your printing!