Alien plant pot or bowl 3D print model

Contest winner: This model won 5th place in creality cloud's plant pot design contest https://www.crealitycloud.com/contest/crealitycloud-plant-pots-design

The Alien plant pot can be also used as a flower vase/ container/ bowl.

The model is available in different thicknesses.

1. Solid model: Where you can scale to your required size and required wall thickness.

Note: to print it hallow density =0 and top wall thickness =0

1. A hallow models of wall thickness= 1mm, 2mm and 3mm.

The eyes can be printed and glued, or the model can be directly painted.

For multi-colour printers the eyes can be directly printed from their position,

https://www.youtube.com/watch?v=m0w9m-jNXDY https://www.youtube.com/watch?v=HS-pPBswFfw&t=1s

Printer: FDM / RESIN,

Filaments: PLA, PETG, ABS, E.T.C,

Infill: Minimum 5%,

Nozzle Temp:190 to 210 bed 90 for PLA (no glue stick/adhesive needed)

Retraction: 4mm; retraction speed 60

Print in place,

Suppoort: turn off supports,

custom supports can be used under chin and lips if layer height is greater than 0.2mm with lower layer heights supports not necessary preview check before printing.

Build plate adhesion: brim at least 5 to 10mm

Thank you, Have an alien day.