IKEA tisken screwless hanger/stand/rack

Elevate your organization game with our ingenious screwless hanger – the perfect blend of innovation and practicality. If you're tired of drilling into walls, our meticulously designed 3D-printable hanger, crafted to flawlessly complement IKEA Tisken suction cups, is your solution.

Picture a world where you can hang coats, bags, keys, and whatever else you need, all without leaving a single mark. Say goodbye to the frustrations of wall damage and the limitations of traditional hooks.

We've incorporated reinforced threaded rods, ensuring not only a seamless assembly process with a few bolts and nuts, but also unwavering strength for the hanger. We recommend PETG for rugged durability or PLA for a user-friendly option when 3D printing your hanger.

Why settle for ordinary when you can have extraordinary? Our hanger is a manifestation of practicality meeting style. Keep your space organized, your walls flawless, and your style uncompromised. From heavy winter coats to delicate scarves, it can handle it all.

Additional hardware required:
- x10 M3 DIN934 Hex nut
- x10 M3x20 DIN 7991 Hex head countersunk screw (M3x16 could also work but M3x20 is preferred)
- x2 M6x300 Threaded rods - Other variations can be used. For example, I personally use x4 M6x120mm threaded rods and I use 2 on the upper and 2 on the lower section. The rod does not need to be threaded, it could smooth or anything else.
- General purpose wood/plastic glue.

This version has a total length of 40cm. A longer version is being designed and will be uploaded soon.

Print all parts laying down flat on the printing surface as shown in the pictures.

Minimum recommended settings for a 0.4mm nozzle setup:

• 0.24mm layer height or lower to show all the low poly details.
• Infill 30%
• Number of perimeters 5 minimum.
• No supports needed