Futuristic Mazed Can Capsule (Remix of Blank Can Cup RETURNS!)

It has solvable maze inside.

After solving the maze, the capsule opens and you drink your drink with the pleasure of solving it.

• You can thread a rope around the loop lid and lock it so that it cannot be opened or you can use it for transport purposes.

• Also I made a snap joint so that the cover does not open upwards

There is a caffeine structure (organic formula) on the cover. I advise you to put the appropriate drink in it.

3D printing settings :

• Maze.stl : All 0.2 mm layer height except || 0.08 layer height between(5.70 - 8.00 mm) (You can set it in prusaslicer)

• Cover.stl : All 0.2 mm layer height except || 0.08 layer height between(134.00 - 137.50 mm) Don't forget to turn it upside down

If you want to save some filament you can reduce the number of walls to 2 and make the number of bottom layers and top layers 3, 2 15% infill for Cover.stl 10% infill for Maze.stl

There may be small symmetry errors I apologise in advance :)) Also i remixed it for 12 oz can cup

• I didn't know the exact length of the can, so I made cover a little long. Be aware of it. -I am still in the printing stage, there may be mistakes(there probably is). I will correct them after printing, briefly this model is WIP.

Have fun while printing !!