Pyke Soul Fighter Prestige League of Legends STL file

3D .STL model of Pyke's Soul Fighter Prestige weapon, as seen in the League of legends game. This includes 9 .STL files, some of which will need to be printed several times. The total length is scaled to 80 cm long.

The pieces are suitable for a printer at least 250 mm high and 250 mm wide; if your printer is smaller, you can cut out the model. The two pieces can then be glued together.

Files include :

PDF files

.STL files

Recommended post-processing :

The parts can be glued together with super glue, I recommend pressing the parts together for 10 seconds and letting dry for a few minutes for strong connection. You can also use glue suitable for 3D printing or epoxy glue.

Sand your 3D prints with sandpaper, using primer or spray filler to achieve a smooth surface. When you're happy with the results, your final coat should be a primer, before painting with acrylic. You can protect your work with satin or gloss varnish.

The 3D models are made by me. These files are packaged in .RAR files, you must extract the files correctly in order to use them, if you have any problems doing this, please contact me.

License information:

You may not resell or distribute these files in any way. Not authorized for commercial use. You may not sell 3D prints or casts created using these files, with the exception of a limited (one-off) quantity such as commissions. Attribution must be given at least once when your project is created using these files: mention Darrkarra in your project description.

Warning:

This is a fanmade item, I am in no way an official reseller or licensee by the relevant intellectual property owners.

You can find me

On Instagram / Facebook @Darrkarra

On www.Darrkarra.com