Jason Voorhees Friday the 13th Diorama Embarcadero

Welcome to your worst nightmare in 3D! Introducing our detailed diorama of the iconic Friday the 13th Embarcadero with Jason Voorhees. This model allows you to bring the legendary horror scene right into your home in 3D art form.

Featured Features:

Detailed and realistic: Every aspect of the diorama, from the jetty to Jason Voorhees, has been carefully modeled to capture the essence of the horror classic.

Simplified 3D printing: we've split the model into 6 individual files to make printing easier and more accurate. This means you can print each part separately and then assemble them together for a stunning result.

Printing Versatility: Compatible with a variety of 3D printers, this model is suitable for enthusiasts of all ages and experience levels.

Technical Details:

File format: STL (6 individual files)

Scale: 1:12 (adjustable)

Level of detail: High

Estimated printing time: Varies depending on your printer settings.

Recommended material: PLA or ABS

Assembly Notes:

Add a Touch of Terror to your Home:

Whether for your personal collection or to surprise your friends and family on Halloween, this diorama is a must-have addition for horror movie lovers and collectors.

Download Now and Start Your Friday the 13th Adventure:

Don't wait any longer to bring the horror to life. Download our Friday the 13th Embarcadero diorama featuring Jason Voorhees and make it a chilling centerpiece in your home.

Are you ready to take on Jason, click "Buy" and start your journey into the heart of terror today!

For SLA (Stereolithography) printing:

Resin: Use standard SLA resin that is compatible with your printer. Black or gray resins may be suitable for a horror diorama like yours.

Layer: For a balance between speed and detail, you can set a layer between 0.05 to 0.1 mm. If you want a higher level of detail, you can opt for thinner layers, but note that this will increase printing time.

Supports: SLA printing generally requires supports. Be sure to configure your printing software to generate suitable supports for the parts of your model that need them.

Curing Time: After printing, parts printed in SLA resin should be cured under an ultraviolet (UV) light source according to the resin manufacturer's recommendations. This may take several minutes per side.

For FDM (Fused Deposition Modeling) printing:

Material: PLA or ABS are good choices for FDM printing. You can opt for colors that match the theme of your model.

Layer: Set a print layer of 0.2 to 0.3 mm for a balance between speed and quality. If you are looking for higher quality, you can reduce the layer, but note that this will increase print time.

Filler: Use 10% to 20% filler to balance strength and material consumption. If you want the model to be more robust, increase the infill, but this will also increase material usage.

Nozzle temperature: Set the nozzle temperature according to your filament manufacturer's recommendations. Generally, for PLA, it is in the range of 190-220°C, while for ABS, it is 230-260°C.

Hot platform (if necessary): If you are using ABS or other material that requires bonding, activate the hot platform at an appropriate temperature, usually around 90-110°C.

Print speed: A standard print speed is 50 to 60 mm/s, but you can adjust it according to your printer and preferences.

Media (if necessary): If any part of your model requires media, make sure to enable media generation in your printing software.

Assembly: After printing the parts, assemble them according to the instructions provided with the model.

https://youtu.be/2R0lBE6IOjQ