FMS ATLAS 6WD SWIVEL AXLE TRAILER

Folowing the rear bucket addition, here we are with the swivel axle trailer matching the rear bucket design and width.
Just a bit longer than the bucket this trailer is for any purpose. the rear panel is opening. It use 54mm diameter x 18mm 1.0 tires like SCX24 jeep.
You can find cheap version of these tires on aliexpress in China.
The swivel use the mirror finish of your print when printing on a glass or mirror then you have to print the pivot or swivel with the upper side on the bed and a additional ring to be glued on the trailor frame in order to get two mirror finish parts in contact together. It works better than expected. A central M3x10 or M3x12 screw is required. Just screw and unscrew a bit to let it move freely.
The axles are leaf springs supported. with all necessary stuffs to assemble. Just look at pictures. you can use M1,4 screws to locate properly the leafspeing support when glueing. then remove the screws.
This trailer has snow runner all purposes trailers look.
Side panels are screwed from bottom of the trailer and you can glue them if needed.
Side panels are not opening. If I have several request for this version i will add a second version with all opening panels.
sent en Email to luc.tellier@wanadoo.fr in case you need support during assembly.
Parts have to be located properly on the bed as I don't know how to do it at the design phase.

Of course you need a hook on your Atlas, either under the bucket like pictures or the rear version you can find in my other creations on this web site.

60°C bed
205°C nozzle 60 mm/s
Filament on picture is PRUSA kaki color
Grey for bucket is Ariane Plast eco grey
use support for rims and side and rear panels just for the far ends of the parts.