Halloween Horror Silhouette Dracula Frankenstein, Wolf Man Creature Black Lagoon

Halloween is lurking just around the corner, and we're still rolling creepy classic horror movie silhouettes for your 3D printing pleasure. These Halloween STL files come in a 4-pack bundle with all the greatest horror movie creatures from the gold age of cinema. This pack contains the following spooky wall art designs:

• Dracula Silhouette from Dracula (1931, Bela Lugosi)
• Frankenstein's Monster Silhouette from Frankenstein (1931, Boris Karloff)
• WolfMan Silhouette from The Wolf Man (1941, Lon Chaney Jr.)

• Creature Silhouette from The Creature from the Black Lagoon (1954)

• See also Classic Horror Movie Silhouettes Part 1 with Freddy Krueger, Michael Myers, and Pennywise (IT) Silhouettes

These are negative space silhouettes, so all you're printing is the black outline. They really pop against a white (or light-colored) background! If you have dark walls, you can print them in a light color filament instead.

Two Sizes Per Horror STL
To make sure everyone can make the most of these holiday artworks, we're supplying each movie character in two file sizes.

If you have a printer with a bed of 300x300mm or more, you can print the "300" versions (check the file name; Ex: Dracula Silhouette 300). If your printer has a standard size bed of 220x220, we also supply a "200" version (Ex: Wolf Man Silhouette 200).

You can scale the 200 files up to the max size of a standard printer, but we find that the closer you get to the edge, the more likely it is to warp on the ends. If you get good bed adhesion, go for it. If not, keep it at 200.

For best results, please use the correct file size for your printer. Adjustments have been made to ensure the files print well on the bed size they were designed for. For example, if you scale Frankenstein 300 down to fit a 220x220 bed, some of the lines will become so thin they won't be very strong. We thickened some of the lines in the 200 version to account for this.

One last tip - if you do scale any of the files larger or smaller, please leave the Z at 100% (1.5mm). It's plenty strong at this thickness and does not need to be increased, while anything smaller could become too flimsy.

DIMENSIONS
Creature Silhouette 300
X = 23.2cm / 9.1in
Y = 30.0cm / 11.8in
Z = 0.15cm / 0.06in

Creature Silhouette 200
X = 15.5cm / 6.0in
Y = 20.0cm / 7.9in
Z = 0.15cm / 0.06in

Dracula Silhouette 300
X = 27.8cm / 10.9in
Y = 30.0cm / 11.8in
Z = 0.15cm / 0.06in

Dracula Silhouette 200
X = 18.5cm / 7.3in
Y = 20.0cm / 7.9in
Z = 0.15cm / 0.06in

Frankenstein Silhouette 300
X = 19.0cm / 7.5in
Y = 30.0cm / 11.8in
Z = 0.15cm / 0.06in

Frankenstein Silhouette 200
X = 12.6cm / 5.0in
Y = 20.0cm / 7.9in
Z = 0.15cm / 0.06in

Wolf Man Silhouette 300
X = 19.4cm / 7.6in
Y = 30.0cm / 11.8in
Z = 0.15cm / 0.06in

Wolf Man Silhouette 200
X = 12.9cm / 5.1in
Y = 20.0cm / 7.9in
Z = 0.15cm / 0.06in

If you like this classic horror fanart, be sure to Follow GetPrinted3D on Cults3D and check back soon. This is just the latest in an ongoing series of GP3D Classic Horror Movie Wallart

• See All GP3D Creations on Cults3D

IMPORTANT: Unless otherwise noted, ALL GetPrinted3D designs are Copyright protected. When you purchase a file, you do NOT have the right to sell the file or printed model. Files may not be redistributed under any circumstances. The models are for personal and private use, and may not be sold commercially without the explicit written consent of GetPrinted3D.

You can obtain a Commercial Resell License to print and legally sell our designs here:
- Patreon.com/GetPrinted3D

Enjoy!

These are all very simple prints that require nothing more than basic settings and relatively quick speed. No supports or brims should be necessary.

Recommended Settings are:
Layer Quality / Resolution: 0.2
Infill: 20%
Speed: 80mm/sec
Supports: No
Plate Adhesion: None