Mini Mug Water Cup Sleeve

To make my "Mommy's Girl" toddler happy, I 3D modeled a spill-proof mini water cup sleeve designed to fit around the 10oz Munchkin Weighted Straw Cup so my daughter could be more like mommy without worrying about spilling her big girl cup. The Munchkin water cup fits 2 ways into the water cup sleeve base. After inserted, the water cup sleeve lid snaps onto the sleeve base.

The base cup does not require any supports. The lid does require some supports, but any imperfect support connections will be hidden inside the cup.

Note: To increase straw protrusion through the sleeve lid, the Munchkin water cup sliding cover needs to be detached.

My total print time to print this multicolor mini cup/lid sleeve was about 14 hours. Without multicolor printing, the print time can be around 8 total hours.

Cup base approx diameter is 100mm
Total cup height is approx 170mm

I've included multicolor split STLs for anyone that would like to print these as multicolor prints and have also included "Single Color" STL files for anyone would like to print these files as single solor files. Single color files include embossed text since color is not used.

Printer: Bambu Lab X1 Carbon
Plate Type: Textured PEI
Filament: Bambu Lab Matte Purple PLA (Cup Sleeve Base), Bambu Lab Basic White PLA (Lid and Text)

Cup Sleeve:
Layer Height: 0.16mm
Supports: NA
Print Speeds:
Outter Wall Print Speed: ≈200mm/s
Inner Wall Print Speed: ≈300mm/s
Overhang Print Speed: ≈30mm/s

Cup Lid:
Layer Height: 0.16mm
Supports: Yes
Print Speeds:
Outter Wall Print Speed: ≈200mm/s
Inner Wall Print Speed: ≈300mm/s
Overhang Print Speed: ≈30mm/s