Adorable Flexi Tortoise

The lovable Flexi Tortoise! This charming little creature is sure to bring joy to anyone who encounters its adorable face.

In addition, I have prepared a pre-painted version for AMS. However, feel free to customize the colors to your liking, as this design is AMS optimized, ensuring a smooth painting experience.

The model requires no supports, simplifying the printing process significantly. For optimal results, we recommend using 3 wall counts, 4 top and bottom layers, and a 15% infill to achieve a sturdy outcome.

If you encounter any bed adhesion issues, don't worry! Simply use a brim or rafts to address the problem effectively. (Recommended on Head)

Let's get creative and spread the joy of our Flexi Tortoise! Happy printing!

Recommended downscaling 100% > 80%

Please note that all ArtFlex designs are protected under Copyright Law. Your purchase does not grant you the right to distribute or sell my designs' digital files or printed models without my explicit written permission. Thank you for respecting my intellectual property rights.

If you intend to sell physical prints of my designs, you must first obtain my permission. Please visit the following link to request

Authorization: https://www.patreon.com/itsartflex.

Thank you for your cooperation and understanding.

Printing this model is super easy:

0.16mm to 0.18mm Layer Height
No supports required
Use 15-20% infill for optimal results
I recommend using three walls
PLA is a great material choice
Ensure that you have proper bed adhesion, especially when printing smaller sizes.

Avoid silk filaments if they are brittle, If you trust your filament quality, you are good to go!