Headphone stand with phone stand

Combined headphone stand and phone stand.
Surface has a structured look, inspired by carbon fiber.

Size is about 235 mm x 151 mm x 232 mm, so make sure it fits your printer and the size of your headphones!
Phone stand is about 82 mm wide and 134 mm in length.

The print in the photos is scaled down, because my Prusa ends at 210 mm height. So the headphones in the pictures have not that much distance to the bottom as they would have with the actual size of the model. This model fits the Bose QC35ii.
Size can be scaled of course, depending on your printer and the size of your headphones.

Bottom surface is flat so it can be put on the printer. I recommend attaching 4 small rubber feet on the printed model for better standing.

Post a make if you like! :-)

Headphones in the renderings are just for illustration and are not included!

By downloading my 3d models you have no right to sell any digital files or printed models of my designs. Personal use only.

Supports are needed on the upper portion and the holes as well as the bottom of the phone stand part. Organic supports work best (see the last pictures). Prints best with PLA or PETG. 0.15 mm layer height looks best, at least 4 perimeters or more recommended. Use some infill (around 25% or more) for better stability. Z-Lift should be increased due to slight warping on shallow angles, depending on your filament and temperature settings.