Skip to content

Triple axle heavy haul trailer plus 2 versions of the jeep

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 2.5k views
  • 11 likes
  • 10 downloads
  • 3 collections
License
3D design format
STL and ZIP Folder details Close
  • Front wheel update.zip
    • Part 50 Front outer wheel.stl
    • Part 50a Front face spike wheel driver.stl
    • Part 50b Front face spike wheel passenger.stl
    • Part 50c Front face reg nuts wheel driver.stl
    • Part 50d Front face reg nut wheel passenger.stl
  • HH triple axle pictorial instructions.zip
  • Heavy Hauler 16 wheel Jeep 3-26-24 Rev a.zip
  • Heavy Hauler 8 wheel Jeep Rev a.zip
    • Part 1 Wheel connector Print 2X.stl
    • Part 10 Chassis back.stl
    • Part 11_JT Michelin 14.00R22_5 Print 8X.stl
    • Part 12 Rims driver side outer print 2X.stl
    • Part 12 Spiked Rims driver side outer print 2X.stl
    • Part 13 Rim driver side inner print 2X.stl
    • Part 14 Rim passenger side inner print 2X.stl
    • Part 15 Rim passenger side outer print 2X.stl
    • Part 15 Spiked Rim passenger side outer print 2X.stl
    • Part 16 5th wheel hitch pin Rev a.stl
    • Part 17 5th wheel Rev a.stl
    • Part 18 Tongue.stl
    • Part 19 Frame connector.stl
    • Part 2 Hubs plain Print 4X Rev A.stl
    • Part 20 Suspension pivot pin Print 2X.stl
    • Part 21 Air reservoir Print 2x.stl
    • Part 22 Back up and park lights rounded.stl
    • Part 22a Back up and park lights rounded single.stl
    • Part 23 Tailight oval.stl
    • Part 23a Tailight oval single.stl
    • Part 24 Side Marker light Print 6X.stl
    • Part 25 Mudflap.stl
    • Part 25a Mudflap.stl
    • Part 25b Mudflap.stl
    • Part 25c Mudflap.stl
    • Part 26 Good Yr alt tire.stl
    • Part 3 Suspension Driver side Rev A.stl
    • Part 4 Airbrakes Print 2X.stl
    • Part 5 Suspension Passenger side Rev A.stl
    • Part 6 Hubs Custom Print 4X Rev A.stl
    • Part 7 Full chassis.stl
    • Part 8 5th wheel Hitch base Rev a.stl
    • Part 9 Chassis front.stl
  • Low boy Heavy Hauler triple axle Rev a.zip
    • Part 10_MT Wood board Middle Driver FRONT.stl
    • Part 11_MT Wood board Driver side FRONT.stl
    • Part 11_MT Wood board Middle Center FRONT.stl
    • Part 12_MT Wood board Middle center FRONT.stl
    • Part 12_MT Wood board Middle Passenger FRONT.stl
    • Part 13_MT Tongue.stl
    • Part 13_MT Wood board Outer Passenger Front.stl
    • Part 14_MT Outrigger board Driver side REAR.stl
    • Part 14_MT Tongue Pin.stl
    • Part 15_MT Front Ramp connector print 4X.stl
    • Part 16_MT Front Ramp pin print 2X.stl
    • Part 17_MT Front Ramp print 2X.stl
    • Part 18_MT Tongue side marker print 2X.stl
    • Part 19_MT Sidemarkers for trailer print 36X.stl
    • Part 1_MT Outrigger board passenger REAR.stl
    • Part 1_MT Wood board Outer passenger REAR alt B.stl
    • Part 20_MT Outrigger Print 36X.stl
    • Part 21_MT Air Reservoir Print 3X.stl
    • Part 22-A_MT Rear deflector panel without tall piece.stl
    • Part 22_MT Rear deflector panel.stl
    • Part 23A_MT Front Frame half 1.stl
    • Part 23B_MT Front Frame half 2.stl
    • Part 23_MT Front Full Frame.stl
    • Part 24_MT Oversize sign.stl
    • Part 25A_MT Outer Rim Passenger Print 6X.stl
    • Part 25_MT Outer Rim Passenger Print 6X.stl
    • Part 26A_MT Inner Rim Passenger Print 6X.stl
    • Part 26_MT Inner Rim Passenger Print 6X.stl
    • Part 28A_MT Hub Horned Face Print 6X.stl
    • Part 28_MT Hub Plain Print 6X.stl
    • Part 29_MT Dual wheel connector shaft Print 3X.stl
    • Part 2_MT Wood board Outer passenger REAR.stl
    • Part 2_MT Wood board passenger REAR.stl
    • Part 34A_MT Suspension Chassis half 1.stl
    • Part 34B_MT Suspension Chassis half 2.stl
    • Part 34_MT Suspension Chassis Full Frame.stl
    • Part 35_MT Tail lights Print 6X.stl
    • Part 36_MT Back up lights.stl
    • Part 37_MT Mudflap Wile Coyote, Left side.stl
    • Part 38_MT Plain Mudflap side Print 2X.stl
    • Part 39_MT Wide Load sign.stl
    • Part 3_MT Wood board Middle passenger REAR.stl
    • Part 40_MT sign.stl
    • Part 41_MT Rear Side marker Print 2X.stl
    • Part 42_MT Rear Chassis Side marker Print 4X.stl
    • Part 43A_MT Semi Front hub Print 2X.stl
    • Part 43_MT Semi Front hub with horned face Print 2X.stl
    • Part 44_MT Semi Front HD Tire Print 2X.stl
    • Part 45_MT Semi Front directional rim passenger.stl
    • Part 46_MT Semi Front directional rim driver.stl
    • Part 47_MT Continetal Tire alternative print 12X.stl
    • Part 48_MT NS Tire Print 12X.stl
    • Part 49A_MT Chassis back half 1.stl
    • Part 49B_MT Chassis back half 2.stl
    • Part 49_MT Chassis back full frame.stl
    • Part 4_MT Wood board Middle center REAR.stl
    • Part 5_MT Wood board Driver side REAR.stl
    • Part 5_MT Wood board Middle Driver REAR.stl
    • Part 6_MT Outrigger board Driver side REAR.stl
    • Part 6_MT Wood board Outer Driver REAR.stl
    • Part 7_MT Outrigger board Driverr REAR.stl
    • Part 7_MT Outrigger board passenger FRONT.stl
    • Part 8_MT Wood board Driver side FRONT.stl
    • Part 8_MT Outrigger board Driver FRONT.stl
    • Part 9_MT Wood board Middle passenger FRONT.stl
    • Part 9_MT Wood board Outer Driver FRONT.stl
    • Part 27_MT Airbrakes Print 3X Rev A.stl
    • Part 30_MT Suspension RS back Print 3X Rev a.stl
    • Part 31_MT Suspension RS front Print 3X Rev a.stl
    • Part 32_MT Suspension LS front Print 3X Rev a.stl
    • Part 33_MT Suspension LS back Print 3X rp Rev a.stl
  • Part 23a Air Reservoir tank Print 2X Rev A.stl
  • Part 23a and b air reservoir.zip
  • Part 23b Air Reservoir compressor Print 2X Rev A.stl
  • Part 24A_MT Oversize Load sign.stl
  • Part 50 Front outer wheel.stl
  • Part 50a Front face spike wheel driver.stl
  • Part 50b Front face spike wheel passenger.stl
  • Part 50c Front face reg nuts wheel driver.stl
  • Part 50d Front face reg nut wheel passenger.stl

Learn more about the formats
Last update 2024-03-27 at 06:20
Publication date 2023-09-14 at 21:50
Design number 1450785
night_stone_

night_stone_

3D printer file info

3D model description

I had a friend who requested this trailer as he used to drive heavy haul truck and trailer in the oilfields. This is a 1/25th scale, triple axle heavy haul lowboy trailer plus 8 wheel jeep or 16 wheel jeep. Choice of Michelin or Goodyear or generic tires. Excavator is only for showing the trailer. Out rigger can be positioned opened or closed, which snaps into place on the trailer. 2 options for wheel hubs.

UPDATE: 03/26/24 Revised 5th wheel hitch, gave it more clearance so hitch pin can go through easier for both 8 wheel and 16 wheel jeeps, Rev a.

UPDATE: 03/25/24 Part 29 can be replaced with 3/16th styrene tubing and the connection between the 2 piece suspension I used 1/8th rod

UPDATE: 03/24/24 Revised parts 27, 30, 31, 32 and 33, look for Rev a. Added more pictures of the completed hauler

UPDATE: 03/13/24 Reworked the air reservoir, made it a solid piece instead of hollow. It is two parts, tank and pressure unit. Parts 23a and part 23b, with Rev A tagged. I have uploaded as individual files and together in a one zip file.

Update: 03/09/24 Added a pictorial instructions in a zip file, "HH triple axle pictorial instructions.zip"

Update: 01/31/24 if you do not have a 3d printer, Andy Lesiak can do the 3d print for you. You can contact him in cults3d, Facebook or Instagram.

Update: 12/29/23 A customer requested the following, front wheels with deep off set. I added a two piece wheel, rim and face. Two styles available, spiked lug nuts or regular nuts. These are direction rims.Available as individual files or a simple zip file for download.

Categories

Designs β€Ί Game β€Ί Auto & moto / RC vehicles / Toys

Tags

Advertising

Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.