Mickey Pencil Holder / Portalápices de Mickey / Mickey Pencil Holder

Hello again!

We added one more pencil holder to our collection.

In this case, a Mickey pencil holder. Easy to print, with two models available:

Model 1: Pencil holder with two side slides (in the ears).

Model 2: Simple pencil holder

The recesses for each part will serve as a guide so that you do not need to calculate the location of each part. The insets are reduced by 0.1 mm in diameter, but depending on the calibration of the printer, a horizontal expansion of -0.2 mm may be necessary to fit smoothly. It is recommended to print an inset and test it to adjust the measurements based on the inset.

Measurements:

Height: 11.2cm

Width: 11.6 cm

Depth: 6 cm

<------------------------------------------------------------------------------------>

English

Hello again!

We add one more pencil holder to our collection.

In this case, a Mickey pencil holder. Easy to print, with two models available:

Model 1: Pencil holder with two side holders (on the ears)

Model 2: Simple pencil holder

The inserts for each part will serve as a guide so that you do not have to calculate the location of each one. The inserts are reduced by 0.1 mm in diameter, but depending on the calibration of the printer, a horizontal expansion of -0.2 mm may be necessary for it to fit without problems. It is recommended to print a insert and test it to adjust the measurements based on it.

Measures:

Height: 11.2cm

Width: 11.6cm

Depth: 6cm

Printer: Tronxy XY 3

Nozzle: 0.4

Rafts: No

Brackets: Depends on settings and line width.

Backfill: 20%

Filament brand: Generic

Filament Color: Black/Leather/White/Pink

Filament material: PLA

<------------------------------------------------------------------------------------>

English:

Printer: Tronxy XY 3

Nozzle: 0.4

Rafts: No

Supports: Depends on settings and line width

Filling: 20%

Filament Brand: Generic

Filament Color: Black/Skin/White/Pink

Filament material: PLA