Game of Thrones - Oberyn Martell

Game of Thrones - Oberyn Martell 3D print model

Description

Game of throne - oberyn martel for 3d printing model

This model was tested in UP PLUS2 The model has been tested and printed in ABS.

Material : ABS Painting : Acrylic Painting

TEST Layer Thickness : 0.15

Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FDM printer can vary from the result shown in the pictures.

Kleaf
Kleaf 2020-03-26 04:58:02 UTC
thank you.
miaomiao3d
miaomiao3d 2015-04-15 05:23:49 UTC
Thanks! Your response was very helpful!
Kleaf
Kleaf 2020-03-26 04:59:44 UTC
If you have any questions, feel free to ask.
miaomiao3d
miaomiao3d 2015-04-12 06:14:21 UTC
Very interesting how you build this model. I noticed it is also colored. I am quite new to 3D printing so I am going to ask you a few dumb questions. Does this model print in color too or is it only available in monochrome? Also I noticed that it is made out of separate parts. Does it require glue for assembly or can you just connect the pieces without it just by inserting the various connectors by hand?
Kleaf
Kleaf 2015-04-15 05:10:59 UTC
I always check a model which I made with printing.unless I don't do it, other people feel unconvinced when even a small problem has happened. The printer which I use is up plus2, operated by FDM system using ABS filament.It can print a product with single color. I usually spay a surfacer primer on the singular product and then paint on it with a acrylic paint.It is too hard to print it as a whole unit so I always print it with several pieces for convinced printing.Several units can be inserted them into a whole unit. And I recommend you to use a glue on the final level.If you have any questions, please feel free to ask me.
Item rating
0 0
Game of Thrones - Oberyn Martell
$35.00
 
Royalty Free License 
Game of Thrones - Oberyn Martell
$35.00
 
Royalty Free License 
Response 80% in 3.0h
3D Modeling
3D Print Modeling
Rendering
Post Production
Animating
Hire me

3D Model formats

Format limitations
  • Stereolithography (.stl)93.1 MB

3D Model details

  • Publish date2015-04-11
  • Model ID#124890
  • Ready for 3D Printing
Help
Chat