Shin Hati starfighter 3.75" figure toy ship From Ahsoka

In the dawning years of the New republic , The last dying gasps of the Empire led to a small faction attempting to restore the great leader Grand Admiral Thrawn to power. One of the Key players in this group was Shin Hati a Dark Force user who Trained under Baylan Skoll, a fallen jedi from the Old Republic. This starfighter was primarily used by Shin and her group to protect valuable assets and to make raids where necesary. Likely a well used Snub fighter from the ancient days of the Old Republic , many times repaired and refurbished to serve other uses.

It is sized for 3.75" scale star wars figures.

Play features, the opening cockpit holds a pilot .

Strong enough for average play, i wouldn't recommend crashing into ground or walls.

The Wings are secured to the rear body using #8 3/4" to 1-1/4" long.After securing the wings to the nose, the nose is attached to the body with 2 additional screws and a 10mm peg. The wingtips, seat back and front grill are simply glued into place. Finally the Canopy is attached using a short length of 1.75mm filament. You can print either the fdm Canopy or the Resin version. I recommend clear resin with topcoats of clear spray paint to give it the familiar glass appearance, then paint the frame to match the rest of the body.

If there is a Ship that you want , that hasn't yet been made available Please message me for requests

This is only licensed for printing by the original purchaser. The STL files may not be sold, or transferred. Prints of this model may not be sold . You are authorized to give away prints at no charge.