DRIP IRRIGATION DRIP IRRIGATION

*UPDATED Self-tightening screw thread adjustable

For indoor and outdoor use. Using a plastic bottle

you can provide the plants in the garden with a

Adjustable drip irrigation system. By turning the valve

you can adjust and control the rate of fall.

Description:

Adjustable switch, can be adjusted to provide suitable water.

According to the different needs of the plant, can control the flow rate, so that.

Auto adjustable

Peak watering

-

You don't have to worry about the water being too fast or the hole.

being blocked.

Easy to use,

Simply put in the right bottle.

Plant watering stakes provide better air tightness, which makes.

Water from the bottle does not flood your planter and matte.

all.

Dimensions:

180x39mm

Ideal for a bottle with content of 0.5L , 1L AND 2 1/4L.

Explanation:

Easy flow control means your plants receive the correct amount of.

water.

Garden watering device, delivers water directly to plant roots.

Suitable for most plants.

In combination with a PET plastic bottle.

Remarks:

Air hole, make a hole in the bottom of the bottle or cut it. You can

better control the flow rate

Printing configuration:

Supports: No

Rafts: No

Backfill: 25%

Layer height: 0,2mm

How I designed this:

Using 360° fusion

The water spout is designed in such a way that it can be easily visualized in 3D.

print it while lying down

The tap can be printed separately and has a 0.1 mm clearance.

estimated printing time 3.26 hrs

layer height 0.4 mm

approximate weight 33 g