[Bundle Version ] Lens Protectors

If you own one of ATN's X-Sight 4K series products,
You may need these screw-on lens caps.

Please note that the rear cap can be screwed inside the front one to be able to store it comfortably in your pocket, as if they were a single piece, without the risk of losing them or, even worse, having them lying around clashing with each other and making unnecessary noises and unwanted.

Note: If you have purchased the product for your personal use, you can print as many pieces as you need.
However, if you intend to give them away to someone or if a friend asks you to make them for him/her, I would appreciate it if you could persuade your friend to purchase the project/design here on Cults3D before printing it for him/her.
I've spent many hours developing my accessories...
Best Regards!

File updated : 10.10.2023

I use PLA/PLA+ because it is a biodegradable material and in case the object is lost in the field we shouldn't worry about having polluted the soil.

For the printing parameters nothing particular...

Slicer : Ultimaker Cura
Nozzle : 0.4mm
Profile : Normal ( 0.15mm )
Support : NO
Adhesion : Skirt ( Skirt Distance : 5 mm )
Infill : 100% ( but you can use whatever you want )
Bed Temp : 65°C
Hot End : 198°C
Print Position : As Is!
Material : eSun ePLA-Matte ( Black )

Objects Sizes

- Front Cap : ~64mm in Diameter , 8mm in Height
- Rear Cap : ~45mm in Diameter , 8mm in Height