Skip to content

Armoured Fingers for Cosplay 001

Advertising
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

  • 584 views
  • 6 likes
  • 1 download

License
3D design format
ZIP Folder details Close
  • Armoured Fingers 001 - Basic v2.zip
    • Notes.txt
    • STL Files/18mm Fingercap Complete/17mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Fingercap Complete/24mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Fingercap Complete/23mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Fingercap Complete/18mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Fingercap Complete/20mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Fingercap Complete/25mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Fingercap Complete/16mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Fingercap Complete/21mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Fingercap Complete/14mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Fingercap Complete/19mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Fingercap Complete/15mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Fingercap Complete/22mm x 18mm Fingercap Complete.stl
    • STL Files/18mm Jointed 2/22mm x 18mm Jointed 2.stl
    • STL Files/18mm Jointed 2/19mm x 18mm Jointed 2.stl
    • STL Files/18mm Jointed 2/25mm x 18mm Jointed 2.stl
    • STL Files/18mm Jointed 2/14mm x 18mm Jointed 2.stl
    • STL Files/18mm Jointed 2/17mm x 18mm Jointed 2.stl
    • STL Files/18mm Jointed 2/21mm x 18mm Jointed 2.stl
    • STL Files/18mm Jointed 2/20mm x 18mm Jointed 2.stl
    • STL Files/18mm Jointed 2/16mm x 18mm Jointed 2.stl
    • STL Files/18mm Jointed 2/15mm x 18mm Jointed 2.stl
    • STL Files/18mm Jointed 2/24mm x 18mm Jointed 2.stl
    • STL Files/18mm Jointed 2/18mm x 18mm Jointed 2.stl
    • STL Files/18mm Jointed 2/23mm x 18mm Jointed 2.stl
    • STL Files/23mm Hinged/21mm x 23mm Hinged.stl
    • STL Files/23mm Hinged/20mm x 23mm Hinged.stl
    • STL Files/23mm Hinged/23mm x 23mm Hinged.stl
    • STL Files/23mm Hinged/22mm x 23mm Hinged.stl
    • STL Files/23mm Hinged/24mm x 23mm Hinged.stl
    • STL Files/23mm Hinged/25mm x 23mm Hinged.stl
    • STL Files/23mm Hinged/17mm x 23mm Hinged.stl
    • STL Files/23mm Hinged/16mm x 23mm Hinged.stl
    • STL Files/23mm Hinged/15mm x 23mm Hinged.stl
    • STL Files/23mm Hinged/14mm x 23mm Hinged.stl
    • STL Files/23mm Hinged/19mm x 23mm Hinged.stl
    • STL Files/23mm Hinged/18mm x 23mm Hinged.stl
    • STL Files/15mm Half/19mm x 15mm Half.stl
    • STL Files/15mm Half/18mm x 15mm Half.stl
    • STL Files/15mm Half/15mm x 15mm Half.stl
    • STL Files/15mm Half/24mm x 15mm Half.stl
    • STL Files/15mm Half/14mm x 15mm Half.stl
    • STL Files/15mm Half/20mm x 15mm Half.stl
    • STL Files/15mm Half/25mm x 15mm Half.stl
    • STL Files/15mm Half/17mm x 15mm Half.stl
    • STL Files/15mm Half/23mm x 15mm Half.stl
    • STL Files/15mm Half/16mm x 15mm Half.stl
    • STL Files/15mm Half/22mm x 15mm Half.stl
    • STL Files/15mm Half/21mm x 15mm Half.stl
    • STL Files/23mm Jointed 2/16mm x 23mm Jointed 2.stl
    • STL Files/23mm Jointed 2/20mm x 23mm Jointed 2.stl
    • STL Files/23mm Jointed 2/23mm x 23mm Jointed 2.stl
    • STL Files/23mm Jointed 2/18mm x 23mm Jointed 2.stl
    • STL Files/23mm Jointed 2/24mm x 23mm Jointed 2.stl
    • STL Files/23mm Jointed 2/15mm x 23mm Jointed 2.stl
    • STL Files/23mm Jointed 2/14mm x 23mm Jointed 2.stl
    • STL Files/23mm Jointed 2/25mm x 23mm Jointed 2.stl
    • STL Files/23mm Jointed 2/19mm x 23mm Jointed 2.stl
    • STL Files/23mm Jointed 2/22mm x 23mm Jointed 2.stl
    • STL Files/23mm Jointed 2/21mm x 23mm Jointed 2.stl
    • STL Files/23mm Jointed 2/17mm x 23mm Jointed 2.stl
    • STL Files/18mm Jointed 3/19mm x 18mm Jointed 3.stl
    • STL Files/18mm Jointed 3/22mm x 18mm Jointed 3.stl
    • STL Files/18mm Jointed 3/14mm x 18mm Jointed 3.stl
    • STL Files/18mm Jointed 3/16mm x 18mm Jointed 3.stl
    • STL Files/18mm Jointed 3/25mm x 18mm Jointed 3.stl
    • STL Files/18mm Jointed 3/17mm x 18mm Jointed 3.stl
    • STL Files/18mm Jointed 3/21mm x 18mm Jointed 3.stl
    • STL Files/18mm Jointed 3/20mm x 18mm Jointed 3.stl
    • STL Files/18mm Jointed 3/24mm x 18mm Jointed 3.stl
    • STL Files/18mm Jointed 3/15mm x 18mm Jointed 3.stl
    • STL Files/18mm Jointed 3/23mm x 18mm Jointed 3.stl
    • STL Files/18mm Jointed 3/18mm x 18mm Jointed 3.stl
    • STL Files/22mm Jointed 3/21mm x 22mm Jointed 3.stl
    • STL Files/22mm Jointed 3/17mm x 22mm Jointed 3.stl
    • STL Files/22mm Jointed 3/25mm x 22mm Jointed 3.stl
    • STL Files/22mm Jointed 3/14mm x 22mm Jointed 3.stl
    • STL Files/22mm Jointed 3/22mm x 22mm Jointed 3.stl
    • STL Files/22mm Jointed 3/19mm x 22mm Jointed 3.stl
    • STL Files/22mm Jointed 3/18mm x 22mm Jointed 3.stl
    • STL Files/22mm Jointed 3/23mm x 22mm Jointed 3.stl
    • STL Files/22mm Jointed 3/15mm x 22mm Jointed 3.stl
    • STL Files/22mm Jointed 3/24mm x 22mm Jointed 3.stl
    • STL Files/22mm Jointed 3/16mm x 22mm Jointed 3.stl
    • STL Files/22mm Jointed 3/20mm x 22mm Jointed 3.stl
    • STL Files/18mm Jointed 1/25mm x 18mm Jointed 1.stl
    • STL Files/18mm Jointed 1/16mm x 18mm Jointed 1.stl
    • STL Files/18mm Jointed 1/14mm x 18mm Jointed 1.stl
    • STL Files/18mm Jointed 1/22mm x 18mm Jointed 1.stl
    • STL Files/18mm Jointed 1/21mm x 18mm Jointed 1.stl
    • STL Files/18mm Jointed 1/17mm x 18mm Jointed 1.stl
    • STL Files/18mm Jointed 1/24mm x 18mm Jointed 1.stl
    • STL Files/18mm Jointed 1/20mm x 18mm Jointed 1.stl
    • STL Files/18mm Jointed 1/18mm x 18mm Jointed 1.stl
    • STL Files/18mm Jointed 1/23mm x 18mm Jointed 1.stl
    • STL Files/18mm Jointed 1/15mm x 18mm Jointed 1.stl
    • STL Files/18mm Jointed 1/19mm x 18mm Jointed 1.stl
    • STL Files/23mm Fingercap Half/17mm x 23mm Fingercap Half.stl
    • STL Files/23mm Fingercap Half/22mm x 23mm Fingercap Half.stl
    • STL Files/23mm Fingercap Half/18mm x 23mm Fingercap Half.stl
    • STL Files/23mm Fingercap Half/16mm x 23mm Fingercap Half.stl
    • STL Files/23mm Fingercap Half/19mm x 23mm Fingercap Half.stl
    • STL Files/23mm Fingercap Half/23mm x 23mm Fingercap Half.stl
    • STL Files/23mm Fingercap Half/20mm x 23mm Fingercap Half.stl
    • STL Files/23mm Fingercap Half/25mm x 23mm Fingercap Half.stl
    • STL Files/23mm Fingercap Half/15mm x 23mm Fingercap Half.stl
    • STL Files/23mm Fingercap Half/24mm x 23mm Fingercap Half.stl
    • STL Files/23mm Fingercap Half/21mm x 23mm Fingercap Half.stl
    • STL Files/23mm Fingercap Half/14mm x 23mm Fingercap Half.stl
    • STL Files/15mm Complete/21mm x 15mm Complete.stl
    • STL Files/15mm Complete/14mm x 15mm Complete.stl
    • STL Files/15mm Complete/15mm x 15mm Complete.stl
    • STL Files/15mm Complete/24mm x 15mm Complete.stl
    • STL Files/15mm Complete/18mm x 15mm Complete.stl
    • STL Files/15mm Complete/23mm x 15mm Complete.stl
    • STL Files/15mm Complete/20mm x 15mm Complete.stl
    • STL Files/15mm Complete/16mm x 15mm Complete.stl
    • STL Files/15mm Complete/17mm x 15mm Complete.stl
    • STL Files/15mm Complete/22mm x 15mm Complete.stl
    • STL Files/15mm Complete/19mm x 15mm Complete.stl
    • STL Files/15mm Complete/25mm x 15mm Complete.stl
    • STL Files/18mm Half/16mm x 18mm Half.stl
    • STL Files/18mm Half/18mm x 18mm Half.stl
    • STL Files/18mm Half/15mm x 18mm Half.stl
    • STL Files/18mm Half/19mm x 18mm Half.stl
    • STL Files/18mm Half/24mm x 18mm Half.stl
    • STL Files/18mm Half/21mm x 18mm Half.stl
    • STL Files/18mm Half/17mm x 18mm Half.stl
    • STL Files/18mm Half/25mm x 18mm Half.stl
    • STL Files/18mm Half/14mm x 18mm Half.stl
    • STL Files/18mm Half/20mm x 18mm Half.stl
    • STL Files/18mm Half/23mm x 18mm Half.stl
    • STL Files/18mm Half/22mm x 18mm Half.stl
    • STL Files/23mm Jointed 1/20mm x 23mm Jointed 1.stl
    • STL Files/23mm Jointed 1/16mm x 23mm Jointed 1.stl
    • STL Files/23mm Jointed 1/24mm x 23mm Jointed 1.stl
    • STL Files/23mm Jointed 1/15mm x 23mm Jointed 1.stl
    • STL Files/23mm Jointed 1/23mm x 23mm Jointed 1.stl
    • STL Files/23mm Jointed 1/18mm x 23mm Jointed 1.stl
    • STL Files/23mm Jointed 1/19mm x 23mm Jointed 1.stl
    • STL Files/23mm Jointed 1/22mm x 23mm Jointed 1.stl
    • STL Files/23mm Jointed 1/14mm x 23mm Jointed 1.stl
    • STL Files/23mm Jointed 1/25mm x 23mm Jointed 1.stl
    • STL Files/23mm Jointed 1/17mm x 23mm Jointed 1.stl
    • STL Files/23mm Jointed 1/21mm x 23mm Jointed 1.stl
    • STL Files/18mm Complete/21mm x 18mm Complete.stl
    • STL Files/18mm Complete/14mm x 18mm Complete.stl
    • STL Files/18mm Complete/17mm x 18mm Complete.stl
    • STL Files/18mm Complete/22mm x 18mm Complete.stl
    • STL Files/18mm Complete/19mm x 18mm Complete.stl
    • STL Files/18mm Complete/18mm x 18mm Complete.stl
    • STL Files/18mm Complete/23mm x 18mm Complete.stl
    • STL Files/18mm Complete/15mm x 18mm Complete.stl
    • STL Files/18mm Complete/24mm x 18mm Complete.stl
    • STL Files/18mm Complete/16mm x 18mm Complete.stl
    • STL Files/18mm Complete/20mm x 18mm Complete.stl
    • STL Files/18mm Complete/25mm x 18mm Complete.stl
    • STL Files/18mm Fingercap Half/14mm x 18mm Fingercap Half.stl
    • STL Files/18mm Fingercap Half/19mm x 18mm Fingercap Half.stl
    • STL Files/18mm Fingercap Half/23mm x 18mm Fingercap Half.stl
    • STL Files/18mm Fingercap Half/25mm x 18mm Fingercap Half.stl
    • STL Files/18mm Fingercap Half/20mm x 18mm Fingercap Half.stl
    • STL Files/18mm Fingercap Half/22mm x 18mm Fingercap Half.stl
    • STL Files/18mm Fingercap Half/17mm x 18mm Fingercap Half.stl
    • STL Files/18mm Fingercap Half/21mm x 18mm Fingercap Half.stl
    • STL Files/18mm Fingercap Half/18mm x 18mm Fingercap Half.stl
    • STL Files/18mm Fingercap Half/16mm x 18mm Fingercap Half.stl
    • STL Files/18mm Fingercap Half/24mm x 18mm Fingercap Half.stl
    • STL Files/18mm Fingercap Half/15mm x 18mm Fingercap Half.stl
    • STL Files/12mm Complete/21mm x 12mm Complete.stl
    • STL Files/12mm Complete/20mm x 12mm Complete.stl
    • STL Files/12mm Complete/18mm x 12mm Complete.stl
    • STL Files/12mm Complete/22mm x 12mm Complete.stl
    • STL Files/12mm Complete/16mm x 12mm Complete.stl
    • STL Files/12mm Complete/24mm x 12mm Complete.stl
    • STL Files/12mm Complete/14mm x 12mm Complete.stl
    • STL Files/12mm Complete/19mm x 12mm Complete.stl
    • STL Files/12mm Complete/23mm x 12mm Complete.stl
    • STL Files/12mm Complete/25mm x 12mm Complete.stl
    • STL Files/12mm Complete/17mm x 12mm Complete.stl
    • STL Files/12mm Complete/15mm x 12mm Complete.stl
    • STL Files/28mm Jointed 2/16mm x 28mm Jointed 2.stl
    • STL Files/28mm Jointed 2/20mm x 28mm Jointed 2.stl
    • STL Files/28mm Jointed 2/18mm x 28mm Jointed 2.stl
    • STL Files/28mm Jointed 2/23mm x 28mm Jointed 2.stl
    • STL Files/28mm Jointed 2/24mm x 28mm Jointed 2.stl
    • STL Files/28mm Jointed 2/25mm x 28mm Jointed 2.stl
    • STL Files/28mm Jointed 2/15mm x 28mm Jointed 2.stl
    • STL Files/28mm Jointed 2/14mm x 28mm Jointed 2.stl
    • STL Files/28mm Jointed 2/22mm x 28mm Jointed 2.stl
    • STL Files/28mm Jointed 2/19mm x 28mm Jointed 2.stl
    • STL Files/28mm Jointed 2/21mm x 28mm Jointed 2.stl
    • STL Files/28mm Jointed 2/17mm x 28mm Jointed 2.stl
    • STL Files/12mm Half/19mm x 12mm Half.stl
    • STL Files/12mm Half/18mm x 12mm Half.stl
    • STL Files/12mm Half/21mm x 12mm Half.stl
    • STL Files/12mm Half/22mm x 12mm Half.stl
    • STL Files/12mm Half/16mm x 12mm Half.stl
    • STL Files/12mm Half/23mm x 12mm Half.stl
    • STL Files/12mm Half/17mm x 12mm Half.stl
    • STL Files/12mm Half/25mm x 12mm Half.stl
    • STL Files/12mm Half/20mm x 12mm Half.stl
    • STL Files/12mm Half/14mm x 12mm Half.stl
    • STL Files/12mm Half/24mm x 12mm Half.stl
    • STL Files/12mm Half/15mm x 12mm Half.stl
    • STL Files/28mm Jointed 3/16mm x 28mm Jointed 3.stl
    • STL Files/28mm Jointed 3/20mm x 28mm Jointed 3.stl
    • STL Files/28mm Jointed 3/23mm x 28mm Jointed 3.stl
    • STL Files/28mm Jointed 3/18mm x 28mm Jointed 3.stl
    • STL Files/28mm Jointed 3/24mm x 28mm Jointed 3.stl
    • STL Files/28mm Jointed 3/15mm x 28mm Jointed 3.stl
    • STL Files/28mm Jointed 3/14mm x 28mm Jointed 3.stl
    • STL Files/28mm Jointed 3/25mm x 28mm Jointed 3.stl
    • STL Files/28mm Jointed 3/19mm x 28mm Jointed 3.stl
    • STL Files/28mm Jointed 3/22mm x 28mm Jointed 3.stl
    • STL Files/28mm Jointed 3/21mm x 28mm Jointed 3.stl
    • STL Files/28mm Jointed 3/17mm x 28mm Jointed 3.stl
    • STL Files/18mm Hinged/24mm x 18mm Hinged.stl
    • STL Files/18mm Hinged/25mm x 18mm Hinged.stl
    • STL Files/18mm Hinged/21mm x 18mm Hinged.stl
    • STL Files/18mm Hinged/23mm x 18mm Hinged.stl
    • STL Files/18mm Hinged/22mm x 18mm Hinged.stl
    • STL Files/18mm Hinged/19mm x 18mm Hinged.stl
    • STL Files/18mm Hinged/18mm x 18mm Hinged.stl
    • STL Files/18mm Hinged/20mm x 18mm Hinged.stl
    • STL Files/18mm Hinged/17mm x 18mm Hinged.stl
    • STL Files/18mm Hinged/16mm x 18mm Hinged.stl
    • STL Files/18mm Hinged/15mm x 18mm Hinged.stl
    • STL Files/18mm Hinged/14mm x 18mm Hinged.stl
    • STL Files/23mm Fingercap Complete/15mm x 23mm Fingercap Complete.stl
    • STL Files/23mm Fingercap Complete/23mm x 23mm Fingercap Complete.stl
    • STL Files/23mm Fingercap Complete/18mm x 23mm Fingercap Complete.stl
    • STL Files/23mm Fingercap Complete/16mm x 23mm Fingercap Complete.stl
    • STL Files/23mm Fingercap Complete/25mm x 23mm Fingercap Complete.stl
    • STL Files/23mm Fingercap Complete/20mm x 23mm Fingercap Complete.stl
    • STL Files/23mm Fingercap Complete/21mm x 23mm Fingercap Complete.stl
    • STL Files/23mm Fingercap Complete/24mm x 23mm Fingercap Complete.stl
    • STL Files/23mm Fingercap Complete/17mm x 23mm Fingercap Complete.stl
    • STL Files/23mm Fingercap Complete/22mm x 23mm Fingercap Complete.stl
    • STL Files/23mm Fingercap Complete/14mm x 23mm Fingercap Complete.stl
    • STL Files/23mm Fingercap Complete/19mm x 23mm Fingercap Complete.stl

Learn more about the formats

Publication date 2023-09-18 at 14:33
Design number 1458614

3D printer file info

3D model description

Dangerous Ladies' 3D models for generics: Armoured Fingers 001: Basics
Models by Jennifer Rezny (@quicksparrows)

.stl format. Will fit on any printer bed. Rings come in 12 sizes (14mm through 25mm diameter) and include 8 styles in multiple sizes. 240 files in all! These are meant to be used interchangeably and creatively to create gauntlet sets for costumes. They have 1.5mm walls and can be customized and kit bashed into anything you'd like.

The styles are:

  • 12mm Complete – a full ring in a straight tube style, short length segments.
  • 15mm Complete – a full ring in a straight tube style, medium length segments.
  • 18mm Complete – a full ring in a straight tube style, long length segments.
  • 12mm Half – a half ring in a straight tube style, short length segments.
  • 15mm Half – a half ring in a straight tube style, medium length segments.
  • 18mm Half – a half ring in a straight tube style, long length segments.
  • Fingercap Complete - a full cap for the end of the finger, in 18 and 23mm
  • Fingercap Half - a half-cap for the end of the finger, in 18 and 23mm
  • Hinged - a ring that is long on top and short on bottom, making it easier to bend the finger, in 18 and 23mm
  • Jointed 1 - a half ring with a scoop on one end and a gentle curve on the other, in 18 and 23mm
  • Jointed 2 - a half ring with a scoop on one end and a sharp curve on the other, in 18, 23 and 28mm
  • Jointed 3 - a half ring with a knuckle cap on one end and a gentle curve on the other, in 18, 23 and 28mm

Segments can be used in either direction.

I suggest doing test prints of the 12mm Complete style to check sizing before you print your finals.

Files include:
- Photos
- .STL files

Please do not redistribute or resell. Intended for personal use only. Commercial use must buy a new copy for each item produced.

Feel free to tag us to show us what you print and make! We love to see finished works.

http://dangerousladies.storenvy.com
http://twitter.com/dangerousladies
http://instagram.com/thedangerousladies

3D printing settings

We print with super fine settings for these, typically 0.1mm layers, 40mm/sec speed, 1.5mm walls and a 12% infill (though these are quite thin, so they print solid.)

Advertising


Issue with this design? Report a problem.

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!


Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.

100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.