Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6223726.
##There are three ways to print this.
-
As single piece:- Please download STL file but there wont be any movements.
-
Multiple Pieces :- Download 3mf file with Full_dismantled.3mf.** BEST QUALITY OUTPUT**. Please use the 3mf file for assembly also.
-
Combined:- You may use any 3D viewer software like 3D builder in windows to merge components according to your printer and filaments. The sky is the limit for this. As a sample, I have uploaded a combined model with the file ending with combined.3mf. This has reduced the main parts to print to just 8. There are also small links and locking bolts which can be ignored if you dont need movements.
##Movements Included
- Dual Front Wheel Steering
- Counter Rotating Back Wheels
- Side Panel Doors Open
NOTE <ins>The tolerances to some elements are zero which has been intensionally provided to friction lock the elements while not in movements. You may have to fine tune the tolerance from your end using scaling funtion in slicer to ensure good fit without compromising movements.This also applies for the pins that make rotation possible between elements. Please proceed with printing all the pins after testing printing a pin and testing the fit of a joint. You should be able to find the adequate scaling factor with this.</ins>
Supports should be provided as required.
Appreciate the makes uploads.Open for suggestions.