Champions League

-------ENGLISH-----------------------------------------

You want to have your own cup.

Print the Champions League in the size you want.

FanArt and for no reason to create fakes.

For private use only.

This cup has a high level of geometry so when manufactured it will not come out phased (that means that the geometries are noticeable and it is seen in low resolution).

Very small layer height for better definition!

Then you can prime with white and on top of this paint, a silver coat of spray.

There are 7 different digital files. All pieces fit perfectly. You just have to keep the same scale on all 3D pieces.

I recommend using putty on all joints to cover and then sand. You will have to sand a lot to achieve the level of shine that I have in the photos of the glass that I made. If you have any questions just write to me.

-------ESPAÑOL-----------------------------------------

You want to have your own cup.

Print the Champions League in the size you want.

FanArt and for no reason as to create counterfeits.

For private use only.

This cup has a high level of geometry, so it will not be fasetted when manufactured (this means that the geometries will be noticeable and it will be seen in low resolution).

Very small layer height for better definition!

Then you can prime with white and over this paint, a silver coat of spray.

There are 7 different digital files. All the pieces fit perfectly. You just have to keep the same scale in all the 3D pieces.

I recommend using putty on all the joints to cover and then sanding. You will have to sand a lot to reach the level of gloss that I have in the pictures of the cup I made. If you have any questions just write me.

-------ENGLISH-----------------------------------------

If you are going to manufacture it in large format, I recommend using a large printer like the CR10s or CR10s5.

Try to use a high layer height so that it does not take too long to print.

-------ESPAÑOL-----------------------------------------

If you are going to make it in large format I recommend using a large printer like the cr10s or cr10s5.

Try to use a large layer height so that it does not take too long to print.