Medieval Flowerpot, Print-in-Place

#PLANTERSXCULTS

Medieval flowerpot, Japanese garden style

This is a flowerpot representing an assembly of broken terracotta pots, all associated with a medieval theme with a stone staircase allowing the pot to ascend, as well as two fortified walls and a small fortified castle.

The prints require no support and can be printed in resin (SLA, MSLA) or plastic (FDM).

I made three prints of the model to make sure there were no printing problems. I printed one in three different colors (white, pink, red), another in gray and finally one that I painted * (orange-brown for the terracotta pot, brick color for the staircase, beige/natural stone for the two fortified walls and gray for the castle.)*

All files available in .stl format

Don't hesitate to send us your photos and share them via the message tab if you need to.

#PLANTERSXCULTS

Printer : SLA Creality LD-002H

Layer thickness: 0.01mm

Base exposure: 40

Normal exposure: 2s

Speed: 2mm/s

Unsupported printing

Printer : SLA Creality Halot-ONE

Layer thickness: 0.03mm

Base exposure: 60s

Normal exposure: 3s

Speed: 2mm/s

Unsupported printing

Printer : SLA Creality Halot-Mage Pro

Layer thickness: 0.05mm

Base exposure: 35s

Normal exposure: 1.4s

Speed: 10mm/s

Unsupported printing

Printer : Raise 3D E2

Plastic: PLA

Layer thickness: 0.1mm

Filling : 15

Nozzle temperature: 200°C

Unsupported printing

Printer : Raise 3D E2

Plastic: PLA

Layer thickness: 0.3mm

Filling : 12

Nozzle temperature: 210°C

Unsupported printing