R3D Supports for Madlad Gitz

READ AND UNDERSTAND DESCRIPTION BEFORE DOWNLOAD!

!!!ATTENTION!!! NO STLs included.
This is LYT files to use with Lychee slicer but you MUST HAVE the original model files . LYT files are useless if you don't have the original STLs. The LYTs CAN NOT be opend without the model files in the scenes.

Put all the LYTs and the STLs in the same folder. Follow the link to the original creator/model and download the STLs before trying to use these supports.

[EDIT 230126: allmost every one of Emangs designs has been removed so the link is dead. I know there are ways to get hold of the files still but I can't point you in that direction. Sorry about that. But if you allready have these files or know someone who does you can buy these supports]

This is LYTs made for the Savage Orcs found in Emangs Madlad Gitz. Follow the link to download the files for free:
https://cults3d.com/en/3d-model/game/madlad-gitz

The "Savage Orcs part01.zip" contains the LYT files with the same name as the original STLs (sometimes with a small comment) but you need to visit Emangs Madlad Gitz to get hold of the STL.

This is some highly detailed models and I was not able to do it without some supports on the model. I prefere to have all supports connected to the raft but it was not possible this time.

This is not all of the LYTs for the Madlad Gitz but more will be uploaded as they get ready and are tested.
So far the following STLs has been supported in part01:
Savage Orc Bow 1
Savage Orc Bow 2
Savage Orc Bow 3
Savage Orc Bow 4
Savage Orc Drummer
Savage Orc Spear 1
Savage Orc Spear 2
Savage Orc Spear 3
Savage Orc Sword 1
Savage Orc Sword 21

Made a video showing the remove of the supports for 3 of these orcs:
https://youtu.be/uok63cZY2ws?si=GiEsnwvnl2UABoKf

Test printed with a Photon Mono 2K using 0.04 layer height