Skip to content

Belt 80cm with description and instructions

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 835 views
  • 2 downloads
  • 1 collection
License
3D design format
3MF and STL Folder details Close
  • Gürtel 80cm.3mf
  • Gürtel 80cm.stl
  • Schnalle.stl

Learn more about the formats
Last update 2023-12-29 at 15:51
Publication date 2023-09-19 at 13:50
Design number 1460729
sprjk

sprjk

3D printer file info

3D model description

I have designed a belt with a belt buckle that works for everyday use. The belt can be printed in different colors and can also be used for cosplay for example. The belt has a width of 35mm, but I believe you can scale it up to +20x% in height, minus scaling only works with supports!

Buckle:

For the belt buckle you need a piece of wire with a diameter of approx. 1.5mm or a larger paper clip. Bend a clasp as shown in the photo. You can mark the buckle with your slicer. The belt buckle is suitable for left and right-sided use, simply insert the clasp into the other side.

Belt:

Measure your waist, then choose a belt with your size (refer to the picture with the measurements). The belt is printed in a spiral, it adapts to the body. You can see the blue belt in the photo, it has already been used for 10 days.

The belts each come with an STL file and a 3MF file, with the 3MF file you can only open the required holes with the slicer if the unused free holes bother you. ]

I've been wearing the belt daily for over two months now and it works wonderfully.

ATTENTION: Download the correct size, this belt is 80cm!

UPDATE: 29.03.2024: The belt in PLA lasts about 3 months, with daily use. I am currently testing the belt in PETG, which will last longer. The belt buckle holds up well in PLA.

If you want other lengths, please contact me.

3D printing settings

The belt buckle:

PLA, with edge, without support, 15% infill, 0.2 - 0.3mm layer, 2 wall lines.

For the belts:

PLA, or PETG with edge, 0.2 - 0.3mm layer, 2 wall lines with 0.4mm nozzle. The belt should then be fully filled. I have had bad experiences with "input shaper", the layers are not as stable!

You may need support for the holes, but it worked for me without support.

The print bed must be at least 210 mm wide.

Tags

Advertising

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.