Skip to content

DIY filament dryer 15W USB Powerd

Advertising
Share
Add to
Make
Advertising
?
Creation quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
  • 248 views
  • 2 downloads
License
3D design format
Folder details Close
  • Boden.stl
  • Deckel.stl
  • Laufrolle_1_608zz.stl
  • Laufrolle_2_608zz.stl
  • Spulenaufnahme_Links.stl
  • Spulenaufnahme_Rechts.stl

Learn more about the formats
Publication date 2023-09-19 at 23:11
?
Published to Thingiverse on: 2022-10-20 at 21:30
Design number 1461705
apohl23

apohl23

3D printer file info

3D model description

English:

Here I present my designed USB 15W filament dryer, it has a 3Stufen USB heating this is actually intended for clothing and thus waterproof. it is connected via a USB type A port and is available on Amazon. important here you should put the 5 heating pads below in the dryer on top of each other to thus reach the 60 ° C. Auslesen the humidity and the temperature I have provided a recess in which a radio-radiation sensor finds place this is available at Lidl-Online. important note to get the pads inside you should once cut the supply cable otherwise you do not get it through the cable feedthrough. (Soldering iron necessary) or Wago clamps.

Amazon Link:

https://www.amazon.de/Brrnoo-Elektrisches-wasserdichtes-Temperaturregelung-Mantelw%C3%A4rmer/dp/B08H2435VD

Lidl-Online Link:

https://www.lidl.de/p/auriol-funkwetterstation-mit-3-sensoren/p100335261

If you have any questions, please write in the comments and I will answer.

Printing settings to reduce the printing time to 24H for the case, Per part about 11h 30 min:

Recommended extruder: Direct extruder

Nozzle diameter: 0.4mm

Line width: 0.8 mm

Layer height: 0.27mm

Print speed: 70mm/s Inflill, reduce outer wall to 60%, 25mm/s ridge layer

Temperature: 240°C / 75° C

Required additional components: 4x ball bearing type 608zz, Filametfittig, one piece Bowden

German:

Here I present my designed USB 15W filament dryer, it has a 3-stage USB heating this is actually intended for clothing and is therefore waterproof. it is connected via a USB type A connection and is available from Amazon. important you should put the 5 heating pads at the bottom of the dryer on top of each other to reach the 60 ° C. To read out the humidity and temperature, I have provided a recess in which a wireless weather sensor can be placed. this is available from Lidl-Online. important note to get the pads inside you should cut the supply cable once otherwise you will not get it through the cable feed-through. (Soldering iron necessary) or Wago folding terminals.

Amazon Link:

https://www.amazon.de/Brrnoo-Elektrisches-wasserdichtes-Temperaturregelung-Mantelw%C3%A4rmer/dp/B08H2435VD

Lidl-Online Link:

https://www.lidl.de/p/auriol-funkwetterstation-mit-3-sensoren/p100335261

If you have any questions, please write it in the comments and I will answer

Print settings to reduce the printing time to 24H for the case, per part about 11h 30 min:

Recommended extruder: Direct extruder

Nozzle diameter: 0.4mm

Line width: 0.8 mm

Layer height: 0.27 mm

Print speed: 70mm/s inflill, reduce outer wall to 60%, 25mm/s first layer

Temperature: 240°C / 75° C

Additional components required: 4x ball bearing type 608zz, Filamet fitting, one piece of Bowden

Tags

Advertising

Page translated by automatic translation. See the original version.
Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi 💜.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.